Plasma spheroidization of nickel powders in a plasma reactor
نویسندگان
چکیده
منابع مشابه
Comparison between microwave and microwave plasma sintering of nickel powders
There is considerable interest in processing technologies which can lead to more energy efficient sintering of metal powders. The use of microwave sintering in particular leads to reduced energy usage during sintering as the volumetric heating process is considerably more efficient compared with resistance heating. In this study the use of a novel plasma microwave processing technology for the ...
متن کاملSurface Treatment of Polymeric Fine Powders by CF4 Plasma in a Circulating Fluidized Bed Reactor
A low-pressure plasma surface treatment of polymeric powders was carried out in a circulating fluidized bed (CFB) reactor (10 mm-I.D. × 800 mm-high) with CF4 glow discharge. The effects of solid circulation rate, treatment time and radio frequency (rf) power of plasma on fluorination of high-density polyethylene (HDPE) powders have been determined. X-ray photoelectron spectroscopy (XPS) and the...
متن کاملPlasma spraying and characterization of chromium carbide – nickel chromium coatings
Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...
متن کاملThermal Plasma Synthesis of Nano-sized Powders
Thermal plasmas, normally generated by DC (direct current) arc or inductively coupled RF (Radio Frequency) discharge, can be described as a high enthalpy flame with extremely high temperature fields (1,000~20,000 K) and a wide range of velocity fields from several m/s [1-5] to supersonic values [6-7]. Since the resultant huge enthalpy can be realized for various kinds of plasma forming gases an...
متن کاملWettability, Flowability and Compactibility of Polymer Powders as a Function of the Plasma Treatment in the Down-Stream Reactor
Plasma treatment of particles offers to tailor macroscopic powder properties like wettability, flowability or compactibility. Plasma activation normally leads to an enhanced wettability and the deposition of SiOx-like nanostructures on the substrate particle surface increases the flowability and compactibility. These different functionalities are investigated and compared for the polymer HDPE (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2004
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02708563