Plasma Printing of an AISI316 Micro-Meshing Punch Array for Micro-Embossing onto Copper Plates
نویسندگان
چکیده
منابع مشابه
Hot embossing of micro-lens array on bulk metallic glass
Hot embossing of micro-lens array on bulk metallic glass C.T. Pan a,∗, T.T. Wu a, M.F. Chen a, Y.C. Chang b, C.J. Lee b, J.C. Huang b a Department of Mechanical and Electro-Mechanical Engineering, and Center for Nanoscience & Nanotechnology, National Sun Yat-Sen University, Kaoshiung 804, Taiwan, ROC b Institute of Materials Science & Engineering, Center for Nanoscience and Nanotechnology, Nati...
متن کاملThe Fabrication of Micro-Array Channels with the Ultrafine-Grained LZ91 Mg-Li Alloy by Micro-Embossing
The fabrication of the micro-channel array through micro-embossing on an ultrafine-grained (UFG) LZ91 Mg-Li alloy was investigated in this paper. Micro-embossing tests indicated that the depth of the channels increase with increasing temperatures. Micro-array channels with widths ranging from 50 μm to 200 μm were performed with an applied force of 2 kN at 423 K, following by a dwell time of 60 ...
متن کاملLiquid transfer between two separating plates for micro-gravure-offset printing
Experimental investigations of the liquid transfer between two separating plates have been carried out, with the aim of increasing the ink transfer ratio in micro-gravure-offset printing. A sessile droplet is divided into two by moving one plate vertically with respect to a fixed plate. The surface contact angles of the sessile droplet on the two plates were of particular interest in this study...
متن کاملFabrication of Polymer Splitter by Micro Hot Embossing Technique
This research focuses on the manufacturing of 1 by 4 multimode polymer splitter. MEMS fabricating process was first adopted for the fabrication of four inches silicon mold insert and then the micro hot embossing technique was applied to the optical class PMMA material for splitters. The BeamPROPTM simulation software was utilized for the design of optimal silicon mold insert. In the analysis of...
متن کاملElectrohydrodynamic jet printing of micro-optical devices
The Electrohydrodynamic-jet (E-jet) printing process combines high resolution printing with a large variety of printing materials, making E-jet suitable for applications ranging from flexible electronics to high resolution biosensors. In this article, we explore a novel E-jet printing application fabricating high-resolution micro-optical devices. Examples given are a microlens array, an optical...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2019
ISSN: 2075-4701
DOI: 10.3390/met9040396