Plasma jet cutting of fiber reinforced plastic(FRP).
نویسندگان
چکیده
منابع مشابه
Shear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملEffect of Plasma and Fiber Position on Flexural Properties of a Polyethylene Fiber-Reinforced Composite.
The aim of this study was to evaluate the effect of plasma treatment using argon and oxygen gases, combined with fiber position on flexural properties of a fiber-reinforced composite. Eleven groups were evaluated, a non-reinforced control group and 10 groups reinforced with InFibra, a woven polyethylene fiber, varying according to the plasma treatment and fiber position. The samples were prepar...
متن کاملFiber-reinforced tough hydrogels
Using strong fibers to reinforce a hydrogel is highly desirable but difficult. Such a composite would combine the attributes of a solid that provides strength and a liquid that transports matter. Most hydrogels, however, are brittle, allowing the fibers to cut through the hydrogel when the composite is loaded. Here we circumvent this problem by using a recently developed tough hydrogel. We fabr...
متن کاملWoven Glass Fiber-Reinforced
ment methods and two spec/imen diameters. Flexural strength and modulus of woven glass fiber-reinforced specimens werc significanLly greater than those without woven glass fiber (p<O.OD, Likewise, comprossive strength of reinforced specimens was signifieantly greater than those without woven glass fiber (p<O.Ol), except for specimens rcjnforced with woven glass fiber oriented at a tilt directio...
متن کاملSimulation of a Helium Atmospheric Plasma Jet Using Fluid Equations
In this study, a cold atmospheric He plasma jet is investigated. The jet is of dielectric barrier discharge type, consisting of a dielectric tube with two metal ring electrodes. The continuity, momentum and energy conservation equations as well as the Poisson equation for obtaining the potential and the electric field, accompanied with the ideal gas laws, are used for the simulation. The result...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 1988
ISSN: 0288-4771
DOI: 10.2207/qjjws.6.505