Plasma deposition of constrained layer damping coatings
نویسندگان
چکیده
منابع مشابه
Plasma spray deposition of tri-layer environmental barrier coatings
n air plasma spray process has been used to deposit tri-layer environmental barrier coatings consisting of a silicon bond coat, a mullite interiffusion barrier, and a Yb2SiO5 top coat on SiC substrates. Solidified droplets in as-deposited Yb2SiO5 and mullite layers were discovered to be epleted in silicon. This led to the formation of an Yb2SiO5 + Yb2O3 two-phase top coat and 2:1 mullite (2Al2O...
متن کاملH∞ Control of Active Constrained Layer Damping
Conventional passive constrained layer damping treatments with visco-elastic cores are provided with built-in sensing and actuation capabilities to actively control and enhance their vibration damping characteristics. Two configurations of the resulting hybrid treatment are considered in this paper. In the first configuration the active control and passive operate separately; whereas in the sec...
متن کاملLubricant-Infused Nanoparticulate Coatings Assembled by Layer-by-Layer Deposition
© 2014 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim 1 wileyonlinelibrary.com coatings on windows, lenses or solar cells, repellent or protective clothing, non-fouling marine vessels or biomedical devices, and anti-icing or drag-reducing surfaces. An ideal coating should ensure stable repellency, should be transparent in order not to affect color or transparency of the un...
متن کاملEvolution of constrained layer damping using a cellular automaton algorithm
Constrained layer damping (CLD) is a highly effective passive vibration control strategy if optimized adequately. Factors controlling CLD performance are well documented for the flexural modes of beams but not for more complicated mode shapes or structures. The current paper introduces an approach that is suitable for locating CLD on any type of structure. It follows the cellular automaton (CA)...
متن کاملDetermination of Optical Properties in Germanium Carbon Coatings Deposited by Plasma Enhanced Chemical Vapor Deposition
In this research, Germanium-carbon coatings were deposited on ZnS substrates by plasma enhanced chemical vapor deposition (PECVD) using GeH4 and CH4 precursors. Optical parameters of the Ge1-xCx coating such as refractive index, Absorption coefficient, extinction coefficient and band gap were measured by the Swanepoel method based on the transmittance spectrum. The results showed that the refra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
سال: 2004
ISSN: 0954-4062,2041-2983
DOI: 10.1243/0954406041319581