PLANE STRAIN TESTS ON REMOLDED CLAY

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

the washback effect of discretepoint vs. integrative tests on the retention of content in knowledge tests

در این پایان نامه تاثیر دو نوع تست جزیی نگر و کلی نگر بر به یادسپاری محتوا ارزیابی شده که نتایج نشان دهندهکارایی تستهای کلی نگر بیشتر از سایر آزمونها است

15 صفحه اول

Bending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition

The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...

متن کامل

Bending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition

The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...

متن کامل

A Hybrid Stress Plane Element with Strain Field

In this paper, a plane quadrilateral element with rotational degrees of freedom is developed. Present formulation is based on a hybrid functional with independent boundary displacement and internal optimum strain field. All the optimality constraints, including being rotational invariant, omitting the parasitic shear error and satisfying Fliepa’s pure bending test, are considered. Moreover, the...

متن کامل

Measurement and prediction of deformation in plane strain compression tests of AA5182

The present paper concerns the numerical prediction and experimental measurement of the distribution of strain in a plane strain compression test by means of a gridded insert. The insert was engraved with a 161 mm grid pitch and was embedded in an AA5182 sample. The tests were performed at 400uC with a reduction ratio of y20% and at a strain rate of 0.7 s. A thermocouple was used to record the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Transactions of the Japan Society of Civil Engineers

سال: 1967

ISSN: 1884-4944,0047-1798

DOI: 10.2208/jscej1949.1967.147_1