Planar Solid Oxide Fuel Cells Using PSZ, Processed by Sequential Aqueous Tape Casting and Constrained Sintering
نویسندگان
چکیده
منابع مشابه
Constrained Sintering in Fabrication of Solid Oxide Fuel Cells
Solid oxide fuel cells (SOFCs) are inevitably affected by the tensile stress field imposed by the rigid substrate during constrained sintering, which strongly affects microstructural evolution and flaw generation in the fabrication process and subsequent operation. In the case of sintering a composite cathode, one component acts as a continuous matrix phase while the other acts as a dispersed p...
متن کاملHigh performance anode-supported tubular solid oxide fuel cells fabricated by a novel slurry-casting method
Tubular solid oxide fuel cells were fabricated and evaluated for their microstructure and electrochemical performance. The tubular substrate was prepared by casting NiO-Y2O3 stabilized ZrO2 (YSZ) slurry on the inner wall of a plastic mold (tube). The wall thickness and uniformity were controlled by slurry viscosity and rotation speed of the tube. The cells consisted of Ni-YSZ functional anode, ...
متن کاملTAPE CASTING OF NON-AQUEOUS HYDROXYAPATITE SLIPS
Thin sheets of hydroxyapatite were fabricated by tape casting process. The non-aqueoustape casting formulation was optimized by adjusting the concentration of organic additivesspecially those of binder and plasticizer in the slurry. The optimized slurry was cast on a glasscarrier using a designed laboratory scale doctor blade. Following a binder removal stage, thetapes were sintered at differen...
متن کاملDynamic Response Analysis of the Planar and Tubular Solid Oxide Fuel Cells to the Inlet Air Mass Flow Rate Variation
The purpose of present study is to investigate the dynamic response of two conventional types of solid oxide fuel cells to the inlet air mass flow rate variation. A dynamic compartmental model based on CFD principles is developed for two typical planar and tubular SOFC designs. The model accounts for transport processes (heat and mass transfer), diffusion processes, electrochemical processes, a...
متن کاملA Low-Order Dynamic Model for Planar Solid Oxide Fuel Cells Using Online Iterative Computation
High-fidelity dynamic models of solid oxide fuel cells (SOFCs) capture the spatial distribution of key performance variables by considering the cells as distributed parameter systems. As such, they are often complex and require extensive computational resources. In this paper, driven by the need to support the control strategy development and system optimization, we develop a low-order SOFC mod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Ceramic Society
سال: 2013
ISSN: 0002-7820
DOI: 10.1111/jace.12559