Planar SOFC Stack with Low-Cost Multi-Layer Ceramic Interconnect
نویسندگان
چکیده
منابع مشابه
Simulation of SOFC stack and repeat elements including interconnect degradation and anode reoxidation risk
Reliability of SOFC stacks is a complex and key issue. This paper presents a simulation study including some degradation processes, namely nterconnect degradation and the anode reoxidation potential. Quantification for these phenomena has been included in a repeat element model to imulate stack degradation and study the influence of design and operating parameters on the degradation. Interconne...
متن کاملStack-less SIMT reconvergence at low cost
Parallel architectures following the SIMT model such as GPUs benefit from application regularity by issuing concurrent threads running in lockstep on SIMD units. As threads take different paths across the control-flow graph, lockstep execution is partially lost, and must be regained whenever possible in order to maximize the occupancy of SIMD units. In this paper, we propose a technique to hand...
متن کاملA Strategy for Achieving High-performance with SOFC Ceramic Anodes
A proposal that high solid oxide fuel cell (SOFC) anode performance can be achieved by using a very thin, catalytically active functional layer, with a noncatalytic conduction layer, has been tested. An anode impedance of 0.26 Ω cm2 was obtained at 973 K in humidified H2 using a Ag-paste conduction layer and a 12 μm thick functional layer made from 1 wt % Pd and 40 wt % ceria in yttria-stabiliz...
متن کاملA Process Based Cost Model for Multi-Layer Ceramic Manufacturing of Solid Oxide Fuel Cells
Planar Solid Oxide Fuel Cell (SOFC) manufacturing can be considered in the pilot plant stage with efforts driving towards large volume manufacturing. The science of the solid oxide fuel cell is advancing rapidly to expand the knowledge base and use of material combinations and layer forming methods for the unit cell. Few of the many processing methods, > 15, reported in literature for layer for...
متن کاملExperimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas
In this study, a solid oxide fuel cell (SOFC) stack has been successfully fabricated and tested by using direct natural gas. The main objective of this research was to achieve optimal long-term performance of the SOFC stack without carbon deposition by using low-cost natural gas as a fuel. The stack configuration was improved by a new interconnect design and made of cost-effective raw materials...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 2005
ISSN: 0161-6374,2576-1579
DOI: 10.1149/200507.0157pv