Pipe whip analysis for nuclear reactor applications
نویسندگان
چکیده
منابع مشابه
On Finite Element Analysis of Pipe Whip Problems
The nonlinear dynamic finite element solution of pipe whip problems is presented. The finite element modelling used, the step-by-step incremental solution of the nonlinear equations of motion and design considerations are discussed. The influence of various physical parameters on the response of the pipe and the restraint, and the effects of using different finite element models are considered....
متن کاملKAPROS-E: Modular Program System for Nuclear Reactor Analysis, Status and Results of Selected Applications
1. Introduction The modular program system KAPROS [1] has been developed in the research centre Karlsruhe for nuclear reactor investigations for more than 30 years. Although in the beginning it also was a main objective to include codes for thermal hydraulic calculations , for safety analysis, for transient analysis, etc., up to few years ago mainly modules for neutron physics calculations were...
متن کاملChallenges in Neutron Transport Analysis for Nuclear Reactor Simulations
In nuclear reactor design, the most fundamental task is to follow the neutron distribution as a function of space, direction, energy and time, in order to maintain and control the nuclear fission chain reaction. The fundamental equation governing the average behaviour of neutrons is given by the linear form of Boltzmann transport equation, which is an integro-differential equation. The core sim...
متن کاملInvestigations on Nuclear Spectroscopy at the Reactor and Their Applications
Physical launch of the WWR-M reactor in the branch of Physical-Technical Institute of AS of the USSR in Gatchina took place on the 29th of December in 1959. However the first work on nuclear spectroscopy was carried out before the reactor was launched; namely, gamma-radiation was measured of short-lived isomeric nucleus with lifetime of some tens of minutes produced by irradiation in the reacto...
متن کاملNuclear Reactor Steam Generation
1. Steam Generation 1.1. General Characteristics 1.2. Circulation in Boiling Water Reactors 1.3. Steam Generation in CANDU Reactors 1.4. Steam Generators 1.5. Steam Generator for PWR and CANDU Systems 1.6. Heat Transfer 2. Steam Generator Operation 2.1. Swelling and Shrinking 2.1.1. Steady State Swelling and Shrinking 2.1.2. Transient Swelling and Shrinking 2.2. Level Control 2.3. Carryover 2.4...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Engineering and Design
سال: 1976
ISSN: 0029-5493
DOI: 10.1016/0029-5493(76)90065-0