Piezoelectric resonant sensors with contactless interrogation for mass-sensitive and acoustic-load detection

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Contactless Interrogation System for Capacitive Sensors with Time-Gated Technique †

This paper presents a measurement technique and system for the contactless interrogation of capacitive sensors via electromagnetic coupling. The interrogation unit employs a primary coil to periodically excite the capacitive sensor connected to a secondary coil forming an LC resonant circuit. When the excitation to the primary coil is switched off the damped response of the LC circuit is detect...

متن کامل

Piezoelectric microelectromechanical resonant sensors for chemical and biological detection.

Piezoelectric microelectromechanical systems (MEMS) resonant sensors, known for their excellent mass resolution, have been studied for many applications, including DNA hybridization, protein-ligand interactions, and immunosensor development. They have also been explored for detecting antigens, organic gas, toxic ions, and explosives. Most piezoelectric MEMS resonant sensors are acoustic sensors...

متن کامل

Analysis and Validation of Contactless Time-Gated Interrogation Technique for Quartz Resonator Sensors

A technique for contactless electromagnetic interrogation of AT-cut quartz piezoelectric resonator sensors is proposed based on a primary coil electromagnetically air-coupled to a secondary coil connected to the electrodes of the resonator. The interrogation technique periodically switches between interleaved excitation and detection phases. During the excitation phase, the resonator is set int...

متن کامل

Sensitive voltage interrogation method using electro-optically tunable SPR sensors.

A novel voltage interrogation method using electro-optically tunable waveguide-coupled surface plasmon resonance sensors is demonstrated. Before measurements, we use a bicell photodetector to detect the reflectance from the sensor and take the differential signal from the photodetector as the resonance condition. For different analytes, by scanning the DC voltage on the waveguide layer of the s...

متن کامل

Steel Bridge Fatigue Crack Detection with Piezoelectric Wafer Active Sensors

Piezoelectric wafer active sensors (PWAS) are well known for its dual capabilities in structural health monitoring, acting as either actuators or sensors. Due to the variety of deterioration sources and locations of bridge defects, there is currently no single method that can detect and address the potential sources globally. In our research, our use of the PWAS based sensing has the novelty of...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Sensors and Actuators A: Physical

سال: 2013

ISSN: 0924-4247

DOI: 10.1016/j.sna.2013.04.029