Physico-chemical characteristics of blended cement pastes containing electric arc furnace slag with and without silica fume
نویسندگان
چکیده
منابع مشابه
Properties of Cement Pastes Doped with Very High Amounts of Ground Granulated Blast-furnace Slag
In the current work, the properties of cement pastes doped with high amounts of ground granulated blast-furnace slag (HVS) were investigated. Portland cement (PC) was substituted with ground granulated blast-furnace slag (donated as slag) at very high amounts of 85%, 90%, 95% and 100%, by weight. PC paste without any content of slag was used as a reference. Some fresh and hardened properties su...
متن کاملFatigue Behavior Analysis of Asphalt Mixes Containing Electric Arc Furnace (EAF) Steel Slag
This research was conducted in order to evaluate fatigue behavior of asphalt mixes containing Electric Arc Furnace (EAF) steel slag. After initial evaluation of the properties of EAF steel slag using X-ray Diffraction (XRD) and Scanning Electric Microscope (SEM), six sets of laboratory mixtures were prepared. Each set were treated replacing various portions of limestone aggregates of the mix wi...
متن کاملfatigue behavior analysis of asphalt mixes containing electric arc furnace (eaf) steel slag
this research was conducted in order to evaluate fatigue behavior of asphalt mixes containing electric arc furnace (eaf) steel slag. after initial evaluation of the properties of eaf steel slag using x-ray diffraction (xrd) and scanning electric microscope (sem), six sets of laboratory mixtures were prepared. each set were treated replacing various portions of limestone aggregates of the mix wi...
متن کاملEffect of Hydrochloric Acid (HCl) on Blended Cement (Fly Ash based) and Silica Fume Blended Cement and their Concretes
This paper presents the effect of Hydrochloric acid (HCl) on Blended Cement (Fly ash based(BC)) and Silica Fume Blended Cement(SFBC) and their concretes. The BC and SFBC and their concretes BCC and SFBCC produced with HCl dosage of 100, 150, 300, 500 and 900 mg/l added in deionised water. In addition to this control specimens were prepared with deionised water (without HCl) for comparison. The ...
متن کاملElectric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: HBRC Journal
سال: 2015
ISSN: 1687-4048,1687-4048
DOI: 10.1016/j.hbrcj.2014.07.002