Physical Modeling of Slag Foaming for Various Operating Conditions and Slag Compositions
نویسندگان
چکیده
منابع مشابه
Slag Behavior in Gasifiers. Part II: Constitutive Modeling of Slag
The viscosity of slag and the thermal conductivity of ash deposits are among two of the most important constitutive parameters that need to be studied. The accurate formulation or representations of the (transport) properties of coal present a special challenge of modeling efforts in computational fluid dynamics applications. Studies have indicated that slag viscosity must be within a certain r...
متن کاملArtificial Intelligence-Based Computer Modeling Tools for Controlling Slag Foaming in Electric Furnaces
Due to increased competition in a world economy, steel companies are currently interested in developing techniques that will allow for the improvement of the steelmaking process, either by increasing output efficiency or by improving the quality of their product, or both. Slag foaming is one practice that has been shown to contribute to both these goals. This paper describes an effort in progre...
متن کاملCompressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents
In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...
متن کاملAbsorption of Lead Ions by Various Types of Steel Slag
Steel slags are the by products of steel industries, which forms during reduction process of iron melting. The chemical composition of it changes depending to the melting procedure. Its mineralogical composition also varies based on the cooling procedure. Two different types of steel slag were used as absorbing bed for various concentrations of Pb2+ ions in the form of lead chlor...
متن کاملThe Effect of Slag Modeling to Improve Steelmaking Processes
This paper attempts to illustrate the benefits of using slag models based on the thermodynamics of steelmaking reactions and the multi-dimensional modeling of phase equilibria. The use of mass balance calculations and the application of these personal computer-based slag models to the refinement of standard operating procedures can simultaneously result in shorter process times, more predictabl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2005
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.45.835