PHYSICAL MODEL TESTS OF WAVE OVERTOPPING AND FORCES ON BREAKWATER CROWN WALLS

Numerical Simulation of Wave Overtopping Over Composite Berm Breakwater

Breakwaters have changed a lot during their design history. Overtopping is an important parameter that its evaluation and reduction has always been noticed. In this study, the wave overtopping of composite berm breakwater as a new conceptual structure has been investigated numerical modeling was performed using FLOW-3D software. Then, based on  a laboratory model conducted by Losada et al, cali...

Wave Overtopping over Sea Dikes and Impact Forces on Storm Walls

the washback effect of discretepoint vs. integrative tests on the retention of content in knowledge tests

در این پایان نامه تاثیر دو نوع تست جزیی نگر و کلی نگر بر به یادسپاری محتوا ارزیابی شده که نتایج نشان دهندهکارایی تستهای کلی نگر بیشتر از سایر آزمونها است

مدلسازی عددی روگذری موج از موجشکن توده سنگی با در نظر گرفتن اثر تخلخل

Wave overtopping on the breakwaters is an important issue in breakwaters’ design. Most of the previous studies focused on experimental researches and numerical modeling of irregular wave overtopping particularly on porous breakwaters has not been studied. In the present study, the verification between experimental studies and numerical modeling of irregular waves overtopping on the porous...

Rubble Mound Breakwater: Run-Up, Reflection and Overtopping by Numerical 3D Simulation

From the numerical point of view, the complexity of the fluid dynamic processes involved has so far hindered the direct application of Navier-Stokes equations within the armour blocks, due to the complex geometry and the presence of strongly non stationary flows, free boundaries and turbulence. In the present work the most recent CFD technology is used to provide a new and more reliable approac...