Phycoremediation of Wastewater: Heavy Metal and Nutrient Removal Processes

Applications of Magnetite Nanoparticles for Heavy Metal Removal from Wastewater

Heavy metal removal from wastewater using various adsorbents: a review

Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals fromwastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewater because of its low cost, availability and eco-friendly nature. Both...

Heavy Metal Removal from Water and Wastewater Using Raw and Modified Diatomite (TECHNICAL NOTE)

heavy metal removal from water and wastewater was investigated by using raw and modified diatomite from Iranian mines. Modification of diatomite was done by impregnating the diatomite surface with 0.35 g of manganese oxide in one gram of diatomite. This modified diatomite was named Mn-Diatomite. The surface area measurements for Mn-diatomite showed a 2.2 fold increase, hence higher removal capa...

performance of biological system and advanced oxidation processes (aop) treating antibiotic production industrial wastewater

در این مطالعه، عملکرد دو سیستم اکسیداسیون شیمیایی پیشرفته و یک سیستم بیولوژیکی برای حذف آموکسی سیلین در فاضلاب های سنتزیدر غلظت های مشابه با موارد صنعتی مورد بررسی قرار گرفته شدند. مطالعه انجام شده دارای سه بخش متفاوت اکسیداسیون با ازن و اشعه uv، اکسیداسیون با استفاده از نانو فتوکاتالیست tio2 و استفاده از بیوراکتور هوازی لجن فعال با جداکننده های فیزیکی می باشد. در هر بخش، متغیر های متفاوتی متنا...

Analysis of Carbonated Biosorbents Application in Heavy Metal Removal from Synthetic Wastewater

Purpose: This study aimed to analyze the effects of removal of hexavalent Chromium using carbonated almond green hulls. In the present study, derived carbon fromalmond green hulls of zonal district of Iran were used to remove hexavalent Chromium from Synthetic wastewater. Materials and Methods: The effects of pH (2-10), Adsorbent dose (2-24 g/L), Cr (VI) concentration (10-100 mg/L), Contact...