Photoelectrochemistry of Cu(In,Ga)Se2 thin-films fabricated by sequential pulsed electrodeposition
نویسندگان
چکیده
منابع مشابه
AgInSe2 thin films prepared by electrodeposition process
In this work, the one step electrodeposition process was used to prepare Ag-In-Se thin films. The films were deposited at room temperature from a bath containing 1-3x10 M AgNO3, 6x10 -2 M InCl3 and 3x10 -2 M of H2SeO3. The KSCN at a concentration of 0.681 M was used as complexing agent. The pH value of the solution was 1.4. Applied potentials to SCE were chosen between -0.3 V and -1.1 V. Films ...
متن کاملElectrodeposition of Bi1ÀxSbx Thin Films
Bismuth and antimony are semimetals with a rhombohedral crystal structure and similar lattice parameters. Bi12xSbx alloys exhibit unusual electronic properties and are of interest for thermoelectric and magnetoelectronic devices. In this paper, we show that Bi12xSbx alloys can be electrodeposited from acidic chloride-based solutions and that a homogenous solid solution is obtained across the en...
متن کاملCHARACTERIZATION OF CO-FE MAGNETIC FILMS FABRICATED BY GALVANO-STATIC ELECTRODEPOSITION
In this research, nanocrystalline Co-Fe coatings were electrodeposited on copper substrate. The influence of current density on different properties of the films at two pH levels was investigated. All the coatings showed nodular structure with rougher morphology at higher current densities. Due to anomalous deposition at higher current density, the amount of iron content increased and reached i...
متن کاملSurfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films
The influences of anionic sodium dodecylsulfate (SDS) and cationic Hexadecyltrimethylammonium bromide (HTAB) surfactants on the incorporation and distribution of barium hexaferrite nanoparticles in the electrodeposited CoFe-BaFe12O19 composite thin films were studied. Sulphate bathes with natural pH containing 0 to 2 g/L surfactants were used for electroplating at room temperature. Field emissi...
متن کاملFatigue mechanism of yttrium-doped hafnium oxide ferroelectric thin films fabricated by pulsed laser deposition.
Owing to their prominent stability and CMOS compatibility, HfO2-based ferroelectric films have attracted great attention as promising candidates for ferroelectric random-access memory applications. A major reliability issue for HfO2 based ferroelectric devices is fatigue. So far, there have been a few studies on the fatigue mechanism of this material. Here, we report a systematic study of the f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Power Sources
سال: 2015
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2014.09.036