Photoelastic Examination of Stress Concentration Factor for U-Notched Tension Bar
نویسندگان
چکیده
منابع مشابه
Photoelastic stress analysis in mandibular bone surrounding bar-clip overdenture implants.
The aim of this in vitro study was to evaluate, using the photoelastic analysis method, the stress distribution in mandibular bone surrounding a bar-clip overdenture when 2 implant angulations were simulated. Two mandibular photoelastic models were manufactured, with 2 implants embedded in the interforaminal region: model 1-PAPI, a photoelastic analysis model with parallel implants; and model 2...
متن کاملInfluence of Stress Concentration Factor on Magnetic Memory Effect of Steel Samples under Dynamic Tension Load
Under the excitation of geomagnetic field, normal component of surface scattering magnetic field intensity Hp(y) changes of steel tensile samples with different stress concentration factors α were studied. Constant amplitude sinusoidal tensile load cycles were applied on 18CrNi4A steel plate samples whose α were respectively 1, 3 and 5. Then the correlation of Hp(y) value changes with loading c...
متن کاملSTRESS CONCENTRATION FACTORS FOR V-NOTCHED PLATES UNDER AXISYMMETRIC PRESSURE by NATHAN
The topic of this thesis is the investigation of the local states of stress resulting from the introduction of a v-notch in a coaxial circle on the pressurized surface of a circumferentially clamped plate subject to axisymmetric loading. The understanding of the fracture behavior of a component experiencing such a condition is of particular interest to the aerospace and defense industries where...
متن کاملEvaluation of Flow and Fracture Propensity of Notched Steel Plates by Means of a Photoelastic Model
The object of this investigation was to gain a better understanding of the flow and fracture propensity of steel plates in which the Wells-type notch served as the fracture initiator. This type of notch is of importance in experimental investigations of the brittle fracture phenomenon because it successfully initiates low-stress brittle fractures in the wide-plate specimen in which it is used. ...
متن کاملComposite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1958
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.24.798