Photocatalytic self-cleaning facades in architectural design
نویسندگان
چکیده
منابع مشابه
Automated Cleaning of Windows on Standard Facades
The aim is a cleaning robot which automatically cleans the outside of windows on a facade with vertical jambs and horizontal bars. The facade has to possess certain constructive properties. This "interface" enables the cleaning robot which is detachable from the building and portable to operate on any respectively designed facade on several buildings. A special cleaning-head keeps the water use...
متن کاملPhotocatalytic and Self-Cleaning Properties of Ag-Doped TiO2
Commercially available TiO2 of anatase structure produced in the Chemical Factory Police S.A. was modified by doping Ag from AgNO3 solution via photodeposition method. The obtained amount of deposited Ag on TiO2 was in the range of 0.11 to 0.98 mass %. Deposition of Ag on TiO2 resulted in the retarding of the recombination reaction and formation of the higher amount of OH radicals on the photoc...
متن کاملPhotocatalytic Self Cleaning Textile Fibers by Coaxial Electrospinning
Photocatalytic self-cleaning textile fibers have been created using coaxial electrospinning. This is accomplished by electrospinning cellulose acetate as the core phase and a dispersion of nanocrystalline TiO2, a well-known photocatalyst, in the sheath phase. A simple deacetylation step after the initial electrospinning yields self-cleaning textile fibers. Self-cleaning activity is exhibited at...
متن کاملPhotocatalytic self-cleaning properties of lanthanum and silver co-doped TiO2 nanocomposite on polymeric fibers
Titania, single-doped and lanthanum-silver co-doped titania nanocomposite were coated on cellulosic and polyacrylonitrile fibers via sol–gel method. The prepared samples were evaluated using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photolumines...
متن کاملPhotocatalytic self-cleaning properties of lanthanum and silver co-doped TiO2 nanocomposite on polymeric fibers
Titania, single-doped and lanthanum-silver co-doped titania nanocomposite were coated on cellulosic and polyacrylonitrile fibers via sol–gel method. The prepared samples were evaluated using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photolumines...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Facta universitatis - series: Architecture and Civil Engineering
سال: 2018
ISSN: 0354-4605,2406-0860
DOI: 10.2298/fuace180630019c