Photoacoustic studies on multilayer dielectric coatings
نویسندگان
چکیده
منابع مشابه
Optimized multilayer dielectric mirror coatings for gravitational wave interferometers
The limit sensitivity of interferometric gravitational wave antennas is set by the thermal noise in the dielectric mirror coatings. These are currently made of alternating quarter-wavelength high/low index material layers with low mechanical losses. The quarter-wavelength design yields the maximum reflectivity for a fixed number of layers, but not the lowest noise for a prescribed reflectivity....
متن کاملFormation of polysaccharide multilayer coatings on emulsion droplets
The sequential deposition of chitosan and pectin on a supported phospolipid bilayer was examined using a quartz crystal microbalance. Multilayer formation was observed. The coating of phospholipid-stabilized emulsion droplets through centrifugation in a stepped sucrose gradient, containing successive layers of pectin and chitosan, was then investigated. Microelectrophoresis of the emulsion drop...
متن کاملLow Friction CrNMPP/TiNDCMS Multilayer Coatings
Transition metal nitrides like CrN and TiN are widely used in automotive applications due to their high hardness and wear resistance. Recently, we showed that a multilayer architecture of CrN and TiN, deposited using the hybrid-high power impulse magnetron sputtering (HIPIMS) and direct current magnetron sputtering (DCMS)-HIPIMS/DCMS deposition technique, results in coatings which indicate not ...
متن کاملEllipsometry of light scattering from multilayer coatings.
A scatterometer is extended and allows us to perform ellipsometric measurements on scattered light in each direction of space. Experimental data are given for single thin-film layers and optical coatings and reveal unexpected results. The phenomena are investigated by means of the electromagnetic theories of surface and bulk scattering that emphasize the role of partial correlation and localize...
متن کاملDelamination of multilayer thermal barrier coatings
Multilayer thermal barrier coatings (TBCs) on superalloy substrates are comprised of an intermetallic bond coat, a thermally grown oxide (TGO) layer, and a porous zirconia top coat that provides thermal protection. The TGO attains a thickness of 1±10 lm prior to failure, while the bond coat and zirconia layer are each about 50±100 lm thick. The preferred method for manufacturing TBCs comprises ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics D: Applied Physics
سال: 1996
ISSN: 0022-3727,1361-6463
DOI: 10.1088/0022-3727/29/5/041