Photo-Theological Stress Analysis on Strip Rolling

Coiler Control in Endless Hot Strip Rolling

JFE Steel Corporation’s East Japan Works (Chiba District) started operation of No.3 Hot Strip Mill in 1995. This line was the first in the world to achieve “endless hot strip rolling.” A new Coiler Control technology was developed. Copyright 2005 IFAC

Analysis of microstructure effects on edge crack of thin strip during cold rolling

Effect of Internal Stress of Incoming Strip on Hot Rolling Deformation Based on Finite Element and Infinite Element Coupling Method

Limited by the deficiency of the finite element method (FEM) to deal with infinite domain problems, the traditional FEM rolling model is not suitable enough to study the effect of the complex internal stress of the incoming strip on hot rolling deformation. To solve this problem, the finite element and infinite element (FE-IE) coupling method is adopted, where the finite element is for the roll...

Effect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling

Flow curves are generated in muti-pass torsion tests for a titanium stabilized and a niobium stabilized IF steel. Two types of test schedule are used, one based on plate rolling and the other approximating strip rolling. The purpose of the former is to define the three critical temperatures of steel rolling. The strip schedules are varied in order to investigate the influence of increasing the ...

Investigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication

In this paper an analytical model for cold rolling of strip has been described. This model is developed based on the slab method of analysis and the hydrodynamic lubrication. The characteristics of rolling are obtained from the equations of equilibrium and the plate was allowed to strain harden assuming that the lubricant behaves as a Newtonian fluid. The shear stress to the plate is obtained b...