Phosphors: Ba9 Lu2 Si6 O24 :Ce3+ : An Efficient Green Phosphor with High Thermal and Radiation Stability for Solid-State Lighting (Advanced Optical Materials 8/2015)

Materials for Solid State Lighting

Dramatic improvement in the efficiency of inorganic and organic light emitting diodes (LEDs and OLEDs) within the last decade has made these devices viable future energy efficient replacements for current light sources. However, both technologies must overcome major technical barriers, requiring significant advances in material science, before this goal can be achieved. Attention will be given ...

Optical Storage Phosphors and Materials for Ionizing Radiation

Eu3+-doped Bi4Si3O12 red phosphor for solid state lighting: microwave synthesis, characterization, photoluminescence properties and thermal quenching mechanisms

Europium-doped bismuth silicate (Bi4Si3O12) phosphor has been prepared by microwave irradiation method and its crystal structure is determined using Rietveld method. As-prepared phosphor consists of spherical, monodispersed particles with few agglomeration, high crystallinity, and narrow grain size distribution. The phosphor can be efficiently excited in the wavelength range of 260-400 nm, whic...

Energy-efficient control of solid-state lighting

Lighting control is in the midst of radical change. Presentday state-of-the-art lighting systems tend to be extremely complex. They exhibit very flexible actuation possibilities with many degrees of freedom that can be exploited to answer dynamiclighting needs. However, user interfaces to these systems are woefully lacking. They are frequently denigrated to a panel of buttons that select partic...

The development of Ce3+-activated (Gd,Lu)3Al5O12 garnet solid solutions as efficient yellow-emitting phosphors

Ce3+-activated Gd3Al5O12 garnet, effectively stabilized by Lu3+ doping, has been developed for new yellow-emitting phosphors. The powder processing of [(Gd1-x Lu x ) 1-y Ce y ]3Al5O12 solid solutions was achieved through precursor synthesis via carbonate precipitation, followed by annealing. The resultant (Gd,Lu)AG:Ce3+ phosphor particles exhibit typical yellow emission at ∼570 nm (5d-4f transi...