Phosphide capacities of ferromanganese smelting slags

Effect of grinding time on flotation recovery of copper smelting slags in Bardaskan district

Copper smelting slags are hard materials. Therefore,to recover their copper by flotation method, grinding should be carried out to obtain optimal particle size. Copper smelting slags in the Bardeskan district, with work index of 16.24 kwh/st, were grinded for 65 minutes to reach an acceptable degree of freedom for the flotation tests, with particle size of 80%, smaller than 70 μm. With this gri...

effect of grinding time on flotation recovery of copper smelting slags in bardaskan district

copper smelting slags are hard materials. therefore,to recover their copper by flotation method, grinding should be carried out to obtain optimal particle size. copper smelting slags in the bardeskan district, with work index of 16.24 kwh/st, were grinded for 65 minutes to reach an acceptable degree of freedom for the flotation tests, with particle size of 80%, smaller than 70 μm. with this gri...

Cementitious Properties of Steelmaking Slags

Aluminum smelting

Hans Christian Oersted first heated potassium amalgam with aluminum chloride and produced tiny pieces of aluminum in 1825. This was twenty years after Sir Humphrey Davy first named the metal “aluminum.” Davy was the first to use electrolysis to produce samples of potassium, sodium, strontium, calcium, barium, magnesium and boron. He tried unsuccessfully for many years to produce aluminum by ele...

Isolation and properties of ferromanganese-depositing budding bacteria from baltic sea ferromanganese concretions.

Hyphal budding bacteria were observed by electron microscopy in thin sections of surface material from Baltic Sea ferromanganese concretions. Similar bacteria were also observed in and isolated from enrichment cultures prepared from the same concretion material. Three morphologically similar strains of Mn-Fe-depositing budding bacteria were isolated from the enrichment cultures. Strain B-4 poss...