Phosphate Adsorption Ability of Granular Gibbsite and Cerium Hydroxide
نویسندگان
چکیده
منابع مشابه
Adsorption behavior of condensed phosphate on aluminum hydroxide.
Sodium pyrophosphate (pyro-P, Na4P2O7), sodium tripolyphosphate (tripoly-P, Na5P3O10), and sodium hexametaphosphate (meta-P, (NaPO3)6) were selected as the model compounds of condensed phosphate to investigate the adsorption behavior of condensed phosphate on aluminum hydroxide. The adsorption was found to be endothermic and divisible into two stages: (1) fast adsorption within 1 h; and (2) slo...
متن کاملKinetics and Thermodynamic Study of Nitrate Adsorption on Granular Ferric Hydroxide
This study explored the feasibility of using granular ferric hydroxide as adsorbent for the removal of NO3-N. Optimum conditions for NO3-N removal were found to be pH 5.0 and equilibrium time 80min. The equilibrium sorption isotherm was better described by Langmuir sorption isotherm model. The maximum sorption capacity of granular ferric hydroxide was 4.254mg/g at 298K. A comparison of four kin...
متن کاملAdsorption behavior studies of Cerium on modified Mesoporous Aluminosilicate
In this paper, the adsorption of cerium on modified Mesoporous aluminosilicate (with Si/Al mole ratio of 10) was studied. The effects of pH, contact time, initial concentration of cerium on adsorption of cerium were investigated. The adsorption capacity was high in the pH range of 4-8 and decreases with decreasing of the pH value. The Langmuir and Freundlich isotherms were applied to represent ...
متن کاملApplication of Granular Ferric Hydroxide in Removal of Nitrate from Aqueous Solutions
The aim of this study is to investigate the nitrate adsorption on granular ferric hydroxide (GFH). The effect of factors such as initial concentration of nitrate, pH, contact time, and adsorbent mass were determined. The study was done in laboratory–scale in which synthetic nitrate solutions in a batch reactor were placed in contact with the adsorbent to model adsorption kinetics. It was found ...
متن کاملAdsorption behavior studies of Cerium on modified Mesoporous Aluminosilicate
In this paper, the adsorption of cerium on modified Mesoporous aluminosilicate (with Si/Al mole ratio of 10) was studied. The effects of pH, contact time, initial concentration of cerium on adsorption of cerium were investigated. The adsorption capacity was high in the pH range of 4-8 and decreases with decreasing of the pH value. The Langmuir and Freundlich isotherms were applied to represent ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Oleo Science
سال: 2011
ISSN: 1345-8957,1347-3352
DOI: 10.5650/jos.60.133