Phase transformation under thermal fatigue of high Mn-TWIP steel: Microstructure and mechanical properties
نویسندگان
چکیده
منابع مشابه
Effect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel
In the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (Fe-30Mn-4Al-4Si-0.5C) was investigated. X-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. The res...
متن کاملeffect of annealing process on microstructure and mechanical properties of high manganese austenitic twip steel
in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...
متن کاملMechanical behaviour of TWIP steel under shear loading
Twinning induced plasticity steels (TWIP) are very good candidate for automotive industry applications because they potentially offer large energy absorption before failure due to their exceptional strain hardening capability and high strength. However, their behaviour is drastically influenced by the loading conditions. In this work, the mechanical behaviour of a TWIP steel sheet sample was in...
متن کاملEffects of Bainitic Transformation Temperature on Microstructure and Tensile Properties of 0.6C-Si-Mn Steel
1 緒 言 工具や軸受,ゲ ージなどの精密部品では残留オーステ ナイ ト(rR)が存在すると硬 さや疲労寿命の低下,切 削性 不良あるいは経年形状変化を招きそれらの性質に有害な 影響をもたらす.そ れゆえ,こ れ らに使用する鋼では rRを 極力減少させ るのが好 ましい.し か しなが ら,rR が低合金構造用鋼に存在する場合には延性やじん性が向 上するとともに低温におけるぜい性破壊の防止に役立つ 場合が多い.そ れゆえ,最 近進んで熱処理によって人 為的にrRの 量や存在形態を調整 し混合組織 として優れ た機械的性質 を得ようとす る研究が しばしば見受 けら れ1)~6)る.こ のようなrRを 積極的に利用 しようとする方法 として,近 年Si-Mn鋼 をベイナイ ト変態させるオース テンパー処理が注 目されている. Si-Mn鋼 をベイナイ ト変態 させた場合多量のrRが ...
متن کاملEqual Channel Angular Pressing of a TWIP steel: Microstructure and mechanical response
A Fe-20.1Mn-1.23Si-1.72Al-0.5C TWIP steel with ultra-fine grain structure was successfully processed through Equal Channel Angular Pressing (ECAP) at warm temperature up to four passes following the BC route. The microstructure evolution was characterized by Electron Back Scattered Diffraction (EBSD) to obtain the grain maps, which revealed an obvious reduction of grain size, as well as a decre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: A
سال: 2016
ISSN: 0921-5093
DOI: 10.1016/j.msea.2016.09.046