Phase Transformation of MoSi<SUB>2</SUB> Phase in MoSi<SUB>2</SUB>/Mo<SUB>5</SUB>Si<SUB>3</SUB> Eutectic Alloy Containing Nb
نویسندگان
چکیده
منابع مشابه
Phase transformation and deformation behavior of NiTi-Nb eutectic joined NiTi wires
NiTi wires were brazed together via eutectic reaction between NiTi and Nb powder deposited at the wire contact region. Phase transformation and deformation behavior of the NiTi-Nb eutectic microstructure were investigated using transmission electron microscopy (TEM) and cyclic loading-unloading tests. Results show that R phase and B19' martensite transformation are induced by plastic deformatio...
متن کاملsynthesis of platinum nanostructures in two phase system
چکیده پلاتین، فلزی نجیب، پایدار و گران قیمت با خاصیت کاتالیزوری زیاد است که کاربرد های صنعتی فراوانی دارد. کمپلکس های پلاتین(ii) به عنوان دارو های ضد سرطان شناخته شدند و در شیمی درمانی بیماران سرطانی کاربرد دارند. خاصیت کاتالیزوری و عملکرد گزینشی پلاتین مستقیماً به اندازه و- شکل ماده ی پلاتینی بستگی دارد. بعضی از نانو ذرات فلزی در سطح مشترک مایع- مایع سنتز شده اند، اما نانو ساختار های پلاتین ب...
STRUCTURAL INTEGRITY CHANGES IN THE Zr-Nb ALLOY DURING HYDRIDE PHASE TRANSFORMATION UNDER THE THERMAL SHOCK
Structural changes and properties of zirconium alloy subjected to the thermal shock in the solar furnace were investigated. Specimens were prepared from unirradiated cold-worked RBMK Zr-2.5Nb fuel channel pressure tube material after adding hydrogen to the sections of the tubes up to 150 ppm. Tests were done at temperatures up to 1460 C and heating rates 50-83 C per second. After thermal treatm...
متن کاملThe Bainitic Phase Transformation in Aluminium Containing Ductile Irons after Short Time of Austempering
The influence of aluminium on the microstructure of austempered ductile cast iron (ADI) has been studied. A number of irons of different compositions have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. Austenitising was carried out at different temperatures and holding times for a variety of experimental irons to achieve suff...
متن کاملStress-induced FCC/FCT phase transformation in Fe–Pd alloy
We report stress-induced martensitic transformation in tensile loaded Fe–30.5 at.% Pd polycrystals, mainly using optical microscopy. Reverse transformation occurs during unloading. Thermodynamic relationships between applied stress, transformation strain and the latent heat of transformation are examined. 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1999
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.40.369