Phase Equilibria in the Ti Rich Region of Ti-Ni-Cu System
نویسندگان
چکیده
منابع مشابه
Phase equilibria and phase transformations in the Ti-rich corner of the Fe–Ni–Ti system
While the main features of the Fe–Ni–Ti system are well known at low Ti content, literature review of the Ti-rich corner revealed inconsistencies between experimental reports. This investigation presents new experimental results, defined to remove the uncertainties concerning melting behavior and solid-state phase equilibria of the (Ni,Fe)Ti2 phase with the adjacent (Fe,Ni)Ti (B2, CsCl-type str...
متن کاملFormation of Ti-Zr-Cu-Ni bulk metallic glasses
Formation of bulk metallic glass in quaternary Ti-Zr-Cu-Ni alloys by relatively slow cooling from the melt is reported. Thick strips of metallic glass were obtained by the method of metal mold casting. The glass forming ability of the quaternary alloys exceeds that of binary or ternary alloys containing the same elements due to the complexity of the system. The best glass forming alloys such as...
متن کاملCorrosion Characteristics of a - Ti and Ti 2 Cu Composing Ti - Cu Alloys
A series ef binary Ti-Cu alloys containing 5-20 mass% Cu was prepared, and the corresien behavior of a-Ti and Ti2Cu composing the Ti-Cu alloys were examined based on the anodic polarization curves and released iens in O.9% NaCl and 1% lactic acid solutions. In both selutions, the Ti-Cu alloys showed the same anodic polarization curves as titanium in the conditien below 1.4 V. Hewever, precipita...
متن کاملLarge supercooled liquid region and phase separation in the Zr–Ti–Ni–Cu–Be bulk metallic glasses
Results of calorimetric, differential thermal analysis, and structural measurements are presented for a series of bulk metallic glass forming compositions in the Zr–Ti–Cu–Ni–Be alloy system. The calorimetric data for five alloys, prepared along the tie line between phase separating and nonphase separating compositions, show that the transition from phase separating to nonphase separating behavi...
متن کاملStructural and Textural Evolution during Cold Work in Ti-Rich Ni-Ti Shape Memory Alloy
The properties and cost have made the Nickel-Titanium (NiTi) shape memory alloys (SMA) attractive for a variety of applications wherein shape memory effect (SME) / superelasticity (SE) and biocompatibility are important. Anisotropy of the shape recovery associated with shape memory effect strongly depends on the type of r 30 minutes in air) Ti-Rich Ni-Ti SMA (Ni51at%Ti) when subjected to cold r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1982
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.46.6_571