Phase diagrams for alkali-activated slag binders

PROPERTIES OF ALKALI-ACTIVATED FLY ASH CONCRETE BLENDED WITH SLAG

SELF-Cured Alkali Activated Slag Concrete Mixes- An Experimental Study

Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of ...

The Interfacial Transition Zone in Alkali-Activated Slag Mortars

The interfacial transition zone (ITZ) is known to strongly influence the mechanical and transport properties of mortars and concretes. This paper studies the ITZ between siliceous (quartz) aggregates and alkali-activated slag (AAS) binders in the context of mortar specimens. Backscattered electron (BSE) images generated in an environmental scanning electron microscope (ESEM) are used to identif...

Phase Diagrams of Binary Systems of Some Alkali Propionates

für Naturforschung in cooperation with the Max Planck Society for the Advancement of Science under a Creative Commons Attribution 4.0 International License. Dieses Werk wurde im Jahr 2013 vom Verlag Zeitschrift für Naturforschung in Zusammenarbeit mit der Max-Planck-Gesellschaft zur Förderung der Wissenschaften e.V. digitalisiert und unter folgender Lizenz veröffentlicht: Creative Commons Namen...

Microstructural Changes Induced by CO2 Exposure in Alkali-Activated Slag/Metakaolin Pastes

The structural changes induced by accelerated carbonation in alkali-activated slag/ metakaolin (MK) cements were determined. The specimens were carbonated for 540 h in an environmental chamber with a CO2 concentration of 1.0 ± 0.2%, a temperature of 20 ± 2°C, and relative humidity of 65 ± 5%. Accelerated carbonation led to decalcification of the main binding phase of these cements, which is an ...