PHASE COMPOSITION AND STRUCTURE OF TIC – HSS STEEL BINDER PRODUCED BY SHS METHOD
نویسندگان
چکیده
منابع مشابه
Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process
In this research, the effect of temperature and time on the properties of AISI420/SAF2507 dissimilar joint produced by transient liquid phase bonding process was investigated. A BNi-2 interlayer with 25 μm thickness was inserted between two dissimilar steel samples. The bonding process was performed at 1050 oC and 1100 oC for different bonding times. The microstructures of the joints were studi...
متن کاملEnhancement Wear Properties of HSS-M2 Tool Steel with WC Deposited by SMAW Process
In this study, the effect of cladded tungsten carbide layer upon HSS - M2 tool steel on microstructure, hardness, and wear behavior has been studied in two cases without using the middle layer and using the middle layer of nickel. Tungsten Carbide cladded on HSS - M2 tool steel by Arc Weld ( SMAW ). The ASTM-G65 wear test was used to determine its application for use in the mineral indus...
متن کاملthe underlying structure of language proficiency and the proficiency level
هدف از انجام این تخقیق بررسی رابطه احتمالی بین سطح مهارت زبان خارجی (foreign language proficiency) و ساختار مهارت زبان خارجی بود. تعداد 314 زبان آموز مونث و مذکر که عمدتا دانشجویان رشته های زبان انگلیسی در سطوح کارشناسی و کارشناسی ارشد بودند در این تحقیق شرکت کردند. از لحاظ سطح مهارت زبان خارجی شرکت کنندگان بسیار با هم متفاوت بودند، (75 نفر سطح پیشرفته، 113 نفر سطح متوسط، 126 سطح مقدماتی). کلا ...
15 صفحه اولRecrystallization Behavior of Deep Drawing Low Carbon Steel Sheets Produced by Mobarakeh Steel Plant
In the present work the recrystallization behavior of deep drawing grade Al-killed low carbon steel sheets produced by Mobarakeh Steel Plant (MSP) has been studied. Salt bath isothermal annealing has b...
متن کاملInvestigation of Phase Evolution of TiC-TiB2 Nanostructure Fabricated by MASHS (RESEARCH NOTE)
Nanocomposite of titanium diboride/titanium carbide was fabricated by combustion synthesis of mechanically milled reactant powders. The stoichiometric mixture of Ti and B4C as starting materials milled for 1, 3, 6 and 9 h. Milled powders pressed to form pellets then green compacts were placed in a tube furnace that preheated to 1100 oC in inert atmosphere (Ar).The samples were investigated by X...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya (Universitiesʹ Proceedings. Powder Metallurgy аnd Functional Coatings)
سال: 2017
ISSN: 2412-8767,1997-308X
DOI: 10.17073/1997-308x-2017-2-64-71