Phase Behavior of Water/Sucrose Dodecanoate/Perfume Systems

Phase Behavior of Sulfonated Polystyrene Systems

INTRODUCTION Polymer blends are of great interest because they provide an economical route to design and produce novel materials that meet the challenging requirements for industrial applications. Recently, a variety of experimental and theoretical work has been conducted as a means for producing materials with improved properties compared to those of its constituents. Some of the findings sugg...

High Temperature Behavior of Dual Phase Steels

Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...

Phase Behavior Cur Of Reservoir Fluid

The Effects of Inhomogeneous Mechanical Properties of the Ferrite Phase on Dual Phase Steel’s Behavior

The microstructure of dual phase steels can be considered as a matrix of ferrite phase reinforced by martensite particles. Recent measurements show that the mechanical properties of the ferrite phase are changed with the distance from the martensite grains. In this paper, a new method has been proposed to consider this phenomenon in finite element modeling of dual phase steels microstructure. I...

Confinement Effects on Phase Behavior of Soft Matter Systems

When systems that can undergo phase separation between two coexisting phases in the bulk are confined in thin film geometry between parallel walls, the phase behavior can be profoundly modified. These phenomena shall be described and exemplified by computer simulations of the Asakura-Oosawa model for colloidpolymer mixtures, but applications to other soft matter systems (e.g. confined polymer b...