Phase and chemical structure characterization in double sided TIG arc welding of HARDOX 450 and AISI 430 steel
نویسندگان
چکیده
منابع مشابه
Micro Laser Welding of AISI 430 Ferritic Stainless Steel: Mechanical Properties, Magnetic Characterization and Texture Evolution
In the present work, a high power Nd:YAG laser has been employed to weld AISI 430 ferritic stainless steel thin sheets. Optical microscopy was used to study the microstructural evolutions during laser welding. Tensile test and microhardness measurement were employed in order to investigate the mechanical behaviors of welds. Also, vibrational sample magnetometry was used for characterizing magne...
متن کاملKeyhole Double-sided Arc Welding Process for Deep Narrow Penetration
In regular arc welding, the arc heat is transferred from the surface of the workpiece to melt it. In keyhole plasma arc welding, the workpiece is melted by the plasma jet which heats the wall of the keyhole along the thickness direction. Penetration is achieved with reduced heat input. However, the plasma jet only gains its energy in the arc before reaching the keyhole. In the keyhole where no ...
متن کاملDouble-sided Arc Welding Increases Weld Joint Penetration
Welding time and joint preparation are among the most important factors dominating the cost and productivity of welding. If the desired penetration of the weld pool can be achieved in a single pass, the welding speed will be the major factor that determines the welding time. When the thickness of the part increases, grooves may have to be machined so that the desired penetration may still be ob...
متن کاملextraction and characterization of allium irancum plant extract and its application in the green synthesis of silver nano particles and oxidation of thiocarbony1 compounds
سنتز سبز نانوذرات فلزی (nps) درسالهای اخیر توجه بسیارزیادی را به خود جلب کرده است. زیرا این پروتوکل کم هزینه وسازگار با محیط زیست از روش های استاندارد سنتز. در این پایان نامه ما گزارش میکنیم یک روش ساده و سازگار با محیط زیست برای سنتز نانوذرات نقره با استفاده از محلول آبی عصاره گیاه allium iranicum به عنوان یک عامل کاهش دهنده ی طبیعی. نانو ذرات نقره مشخص شد با استفاده از تکنیک های uv-visible، x...
Improved Microstructure and Properties of 6061 Aluminum Alloy Weldments Using a Double-Sided Arc Welding Process
Due to its popularity and high crack sensitivity, 6061 aluminum alloy was selected as a test material for the newly developed double-sided arc welding (DSAW) process. The microstructure, crack sensitivity, and porosity of DSAW weldments were studied systematically. The percentage of fine equiaxed grains in the fully penetrated welds is greatly increased. Residual stresses are reduced. Porosity ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Cumhuriyet Science Journal
سال: 2020
ISSN: 2587-2680
DOI: 10.17776/csj.742964