Pervaporation Performance of Composite PDMS Membrane for Butanol Production
نویسندگان
چکیده
منابع مشابه
High performance ceramic hollow fiber supported PDMS composite pervaporation membrane for bio-butanol recovery
In this work, ceramic hollow fiber supported polydimethylsiloxane (PDMS) composite membranes were developed by dip-coating PDMS layer on the surface of macroporous ceramic hollow fiber support. By controlling the properties of polymer solution and ceramic hollow fiber, high-quality ceramic hollow fiber supported PDMS composite membranes were fabricated for pervaporation (PV) recovery of biobuta...
متن کاملPDMS/PVDF composite pervaporation membrane for the separation of dimethyl carbonate from a methanol solution
In this paper, polydimethylsiloxane (PDMS) composite membranes that were supported using polyvinylidene fluoride (PVDF) microfiltration membrane were developed for the pervaporation (PV) of dimethyl carbonate (DMC) from a methanol solution. Experimental studies on the solubility and the diffusivity of pure DMC and methanol in the membrane were first measured. Higher DMC uptake indicates that th...
متن کاملPEBA/ceramic hollow fiber composite membrane for high-efficiency recovery of bio-butanol via pervaporation
In this work, poly (ether-block-amide) (PEBA)/ceramic hollow fiber (HF) composite membranes with high flux were prepared by dip-coating the ceramic hollow fiber with PEBA polymer solution for pervaporation (PV). The membrane fabrication was optimized by finely tailoring the coating parameters such as the viscosity and concentration of PEBA coating solution, which made the pervaporation flux as ...
متن کاملEnhanced Bioethanol Production in Batch Fermentation by Pervaporation Using a PDMS Membrane Bioreactor
The integration of batch fermentation and membrane-based pervaporation process in a membrane bioreactor (MBR) was studied to enhance bioethanol production compared to conventional batch fermentation operated at optimum condition. For this purpose, a laboratory-scale MBR system was designed and fabricated. Dense hydrophobic Polydimethylsiloxane (PDMS) membrane was used for pervaporation. For fer...
متن کاملPreparation and characterization of poly(dimethylsiloxane)- polytetrafluoroethylene (PDMS-PTFE) composite membrane for pervaporation of chloroform from aqueous solution
−Hydrophobic polydimethylsiloxane polytetrafluoroethylene (PDMS-PTFE) flat-sheet membranes for pervaporation (PV) of chloroform from aqueous solution were successfully fabricated by solution casting method. The structures and the performance of the membranes was characterized by X-ray diffraction (XRD), scanning electron microscope combined with energy dispersive X-ray spectroscopy (SEM-EDXS), ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2012
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2012.08.839