Perovskite light-emitting diodes based on n-type nanocrystalline silicon oxide electron injection layer

Bright light-emitting diodes based on organometal halide perovskite.

Solid-state light-emitting devices based on direct-bandgap semiconductors have, over the past two decades, been utilized as energy-efficient sources of lighting. However, fabrication of these devices typically relies on expensive high-temperature and high-vacuum processes, rendering them uneconomical for use in large-area displays. Here, we report high-brightness light-emitting diodes based on ...

Light-emitting silicon pn diodes

We report on the electrical and optical characteristics of silicon light-emitting pn diodes. The diodes are prepared by ion implantation of boron at high doses and subsequent hightemperature annealing. Under forward bias, the diodes emit infrared electroluminescence closely below the band gap of bulk Si. We present a rate-equation model for bound excitons, free excitons and free carriers which ...

Influence of n-type versus p-type AlGaN electron-blocking layer on InGaN/GaN multiple quantum wells light-emitting diodes

Solution processed tungsten oxide interfacial layer for efficient hole-injection in quantum dot light-emitting diodes.

A highly efficient and stable QLED using an inorganic WO3 nanoparticle film as a hole injection layer is demonstrated.The resulting WO3 nanoparticle-based QLEDs also exhibit superior performance compared to that of the present PEDOT:PSS-based QLEDs. The results indicate that WO3 nanoparticles are promising solution-processed buffer layer materials and serve as a strong candidate for QLED techno...

Electron leakage effects on GaN-based light-emitting diodes

Nitride-based light-emitting diodes suffer from a reduction (droop) of the internal quantum efficiency (IQE) with increasing injection current. Using advanced device simulation, we investigate the impact of electron leakage on the IQE droop for different properties of the electron blocker layer (EBL). The simulations show a strong influence of the EBL acceptor density on the droop. We also find...