Performing self-compacting concrete with electric arc-furnace slag as aggregates

Electric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads

This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...

Potential Reuse of Electric-Arc Furnace Dust (EAFD) in Concrete

This study investigated electric arc furnace dust (EAFD) reuse as a raw material in concrete mixes. A comprehensive experimental program consisting of two phases of testing was carried out. The first phase included the replacement of ordinary Portland (Type I) cement by unsieved dust with the percentages of 0, 2.5, 5, 7.5 and 10%. The second phase included the replacement of quartz (filler) by ...

Self-compacting Concrete (scc)

The Phase Composition of Electric Furnace Slag

Elementary and phase composition as well as micrography of the electric furnace slag were examined. The base of slag is made from phases containing Fe, Mn and Ca. Grains differ in size and shape, they cling together to form bigger or smaller agglomerates, depending on separated fractions. Relative distribution of identified phases in separated fractions is presented and the possibility of phase...

Fatigue Behavior Analysis of Asphalt Mixes Containing Electric Arc Furnace (EAF) Steel Slag

This research was conducted in order to evaluate fatigue behavior of asphalt mixes containing Electric Arc Furnace (EAF) steel slag. After initial evaluation of the properties of EAF steel slag using X-ray Diffraction (XRD) and Scanning Electric Microscope (SEM), six sets of laboratory mixtures were prepared. Each set were treated replacing various portions of limestone aggregates of the mix wi...