PERFORMANCES OF HIGH POROUS CELLULAR CONCRETE
نویسندگان
چکیده
منابع مشابه
Preparation and properties of porous aerated concrete
INTRODUCTION Porous concrete, especially Aerated Autoclaved Concrete (AAC) was first developed by a Swedish engineer between the years 1920 and 1932 [1]. He was searching for a material with the properties of wood, but without the disadvantages of wood. Near the end of World War II, AAC became widely used. Vast areas of cities and industries lay in waste and tremendous rebuilding became necessa...
متن کاملShrinkage of High Strength Concrete
This paper presents the results of an experimental investigation carried out to evaluate the shrinkage of High Strength Concrete. High Strength Concrete is made by partially replacement of cement by flyash and silica fume. The shrinkage of High Strength Concrete has been studied using the different types of coarse and fine aggregates i.e. Sandstone and Granite of 12.5 mm size and Yamuna and Bad...
متن کاملPerformance of High-strength Concrete
This research was undertaken to investigate performance of high-strength concrete incorporating mineral admixtures, fly ash and silica fume. For modern construction, the use of new construction materials is increasing to achieve economy and improved final results. An extensive literature search was carried out to review various engineering properties of high-strength concrete. In this study, th...
متن کاملEvaluation of Autogenous Shrinkage in High-Performance Concrete
Recent tendencies in concrete technology have been towards to high- performance concrete with a low water-cement ratio. However, high performance concretes have some problems. One of the problems is early-age cracking due to autogenous shrinkage. This study presents the results of an experimental investigation carried out to evaluate the autogenous shrinkage of high-strength concrete. Accordi...
متن کاملFlexural Performance of High-strength Prestressed Concrete-encased Concrete-filled Steel Tube Sections
The sections composed of concrete and steel, which include concrete-encased concrete-filled tubes, generally have defects due to the low tensile strength of concrete. Therefore, an appropriate method was used for the combination of concrete-filled tubes (CFT) and prestressing strands which is encased in concrete. The conventional design guidelines are commonly developed for materials with norma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction Materials and Products
سال: 2020
ISSN: 2618-7183
DOI: 10.34031/2618-7183-2020-3-5-5-14