Performance test of avalanche measurements fence using piezoelectric limit sensors
نویسندگان
چکیده
منابع مشابه
Weight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)
The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...
متن کاملCorrosion Monitoring Using Embedded Piezoelectric Sensors
In this research, a new type of corrosion monitoring technique for reinforce concrete was developed. The technique used piezoelectric sensors to detect the ultrasonic signals during corrosion. The mechanism of the method was presented. Experiment was carried out to monitor the corrosion process using piezoelectric sensors. The corrosion was also monitored using stain gauge for comparison.
متن کاملStructural health monitoring using piezoelectric impedance measurements.
This paper presents an overview and recent advances in impedance-based structural health monitoring. The basic principle behind this technique is to apply high-frequency structural excitations (typically greater than 30kHz) through surface-bonded piezoelectric transducers, and measure the impedance of structures by monitoring the current and voltage applied to the piezoelectric transducers. Cha...
متن کاملAn Efficient Fence Fill Algorithm using Inside-Outside Test
In this paper, we introduce a modified fence fill algorithm for filling a polygon. Fence fill algorithm is a modified edge fill algorithm. As opposed to the edge fill algorithm that fills pixels starting from the polygon edge to the maximum screen coordinates, the fence fill algorithm fills pixels bounded by the polygon edge and the fence. This involves large number of calculations to find the ...
متن کاملDetection of Structural Cracks Using Piezoelectric Active Sensors
This study proposes a novel approach to identifying crack damage common to metallic structural elements under extreme cyclic loading. Using two piezoelectric pads surface mounted to a structural element, broadband signals can be used to locally excite the element using one pad and the corresponding system response measured with a second pad. An auto-regressive with exogenous input (ARX) system ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the JSME (in Japanese)
سال: 2018
ISSN: 2187-9761
DOI: 10.1299/transjsme.18-00244