Performance prediction of ion-engineered water injection (EWI) in chalk reservoirs using Response Surface Methodology (RSM)

Investigation of UV/TiO2-N photocatalytic degradation of AR 40 using response surface methodology (RSM)

Introduction: Advanced oxidation processes (AOPs) suggest a highly reactive, nonspecific oxidant namely hydroxyl radical (OH•), that oxidize a wide range of pollutants fast and non-selective in wastewater and water. Materials and methods: In this work, the nitrogen-doped titanium dioxide nanoparticles were primed by sol-gel method, characterized by X-ray diffraction and Scanning Elect...

Optimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)

The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction ti...

Design of Dye Adsorption by Amine Terminated Dendritic Functionalized Halloysite Nanotubes Using Response Surface Methodology (RSM)

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Optimization of fluoride in water using alum with response surface methodology

Introduction: Fluoride counts an essential element for human health. Therefore, both low and excessive concentrations of that element in drinking water may cause health problems for the consumers. The present study aims to optimize fluoride base in drinking water using Alum response surface methodology. Methods: The present study is an analytical research which uses surface response method b...