Performance of Solid Alkaline Fuel Cells Employing Layered Perovskite-Type Oxides as Electrolyte
نویسندگان
چکیده
منابع مشابه
Performance of Ceria-electrolyte Solid Oxide Fuel Cell Using Simulated Biogas Mixtures as Fuel
In this study, a samarium cerium electrolyte-supported solid oxide fuel cell (SOFC) was assembled with Ce0.8Sm0.2O2−δ (SDC) electrolyte, La0.58Sr0.4Fe0.8Co0.2O3-δ (LSCF) as cathode and WNi-Ce as anode. A porous layer of SDC between anode and electrolyte was used to improve adhesion of the anode ink. The cell performance was investigated with hydrogen and three simulated biogas mixtures (CH4/CO2...
متن کاملStudy of Alkaline Electrodes for Hybrid Polymer Electrolyte Fuel Cells
Hybrid polymer electrolyte fuel cells combine a proton exchange membrane PEM and anion exchange membrane AEM and exhibit unique advantages. The electrochemical performance and current limitations of a hybrid cell with an alkaline electrode fabricated on a Nafion membrane was characterized at 70°C as a function of relative humidity. To separate the individual characteristics of the AEM anode and...
متن کاملA Numerical Simulation Model of Solid Acid Fuel Cell Performance by CsH2PO4 Electrolyte
The performance of the solid acid fuel cell by CsH2PO4 electrolyte was analyzed using the present model of the electrochemical reaction and transport phenomena, which are fully coupled with the governing equations. Development of such a model requires creating the three-dimensional geometry and its mesh grid, discretization of momentum, mass and electric charge balance equation and solving the ...
متن کاملLa0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملAuto - combustion synthesis of perovskite - type oxides
A versatile one-pot auto-combustion method for the synthesis of powders of iron-doped strontium titanate, SrTi1-xFexO3-δ, has been developed. The synthesis is optimised by the combined use of EDTA and citric acid as chelating agents, and an appropriate balance between fuel and oxidising elements in the reaction mixture. The method produces immediately an almost phase-pure perovskite oxide powde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Transactions
سال: 2019
ISSN: 1938-6737
DOI: 10.1149/1.3484672