Performance of Near Dry Hard Machining Through Pressurised Air Water Mixture Spray Impingement Cooling Environment
نویسندگان
چکیده
منابع مشابه
Comparative Performance In Hard Turning Of AISI 1015 Steel With Carbide Insert Using Orthogonal Array Design And Grey Relational Analysis Under Spray Impingement Cooling And Dry Environment: A Case Study
This study investigates the effects of cutting parameters on surface roughness (Raμm ), cutting temperature (T0C) at the chip tool interface and the material removal rate (MRR mm3/min) during hard machining of AISI 1015 (43 HRC) steel using carbide insert under dry and spray impingement cooling environment. A combined technique using orthogonal array and analysis of variance (ANOVA) was employe...
متن کاملModeling and Trajectory Optimization of Water Spray Cooling in a Liquid Piston Air Compressor
An efficient and sufficiently power dense air compressor/expander is the key element in a Compressed Air Energy Storage (CAES) approach. Efficiency can be increased by improving the heat transfer between air and its surrounding materials. One effective and practical method to achieve this goal is to use water droplets spray inside the chamber when air is compressing or expanding. In this paper,...
متن کاملInternal Flow and Near-Orifice Spray Visualisations of a Model Pharmaceutical Pressurised Metered Dose Inhaler
The pressurised Metered Dose Inhaler (pMDI) has become the most prescribed drug delivery system for treating the respiratory diseases. However, the spray generation mechanism of these devices has not been extensively researched and there is very little information regarding the two-phase fluid dynamics associated with pre-atomisation inside the valve stem. The aim of the work presented in this ...
متن کاملModelling of Gasoline Spray Impingement
This paper is concerned with aspects of gasoline spray droplet impingement simulation, for which an improved model has been developed for predicting the outcomes of spray droplets impacting on a wall. The model is assessed by simulating experiments on oblique spray impingement in a wind tunnel. This is done with the aid of a specially-devised procedure for deducing the specification of initial ...
متن کاملSimulation of Cold Spray Nozzle Accompanying a Water-cooling Adjustment
Cold spraying is a coating process which enables production of metallic and metallic ceramic coatings with dense (very low porosity level) and pure (low oxygen content) structures. Several coating applications such as corrosion resistance and electrical conductivity rely on these properties. Generally, cold spraying is based on higher particle velocities and lower process temperatures than othe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Automotive and Mechanical Engineering
سال: 2019
ISSN: 2180-1606,2229-8649
DOI: 10.15282/ijame.16.1.2019.3.0465