PERFORMANCE OF FIXED BED REACTORS WITH CATALYST FOULING

24 Fixed Film Stationary Bed and Fluidized Bed Reactors

Rigorous Modeling of Fixed-Bed Reactors Containing Finite Hollow Cylindrical Catalyst with Michaelis-Menten Type of Kinetics

A large number of chemical, bio-chemical and pollution-control processes use heterogeneous fixed-bed reactors. The use of finite hollow cylindrical catalyst pellets can enhance conversion levels in such reactors. The absence of the pellet core can significantly lower the diffusional resistance associated with the solid phase. This leads to a better utilization of the catalytic material, which i...

Fixed Bed Reactors for the Cultivation of Mammalian Cells: Design, Performance and Scale-Up

Fixed-bed reactors have gained growing attention for the cultivation of mammalian cells. They allow for a low shear stress cultivation of adherent and non-adherent cells due to the immobilization of cells within macroporous carriers. Their potential has been demonstrated for many cell culture purposes. Some of the recent developments are presented in this review, including improved antibody pro...

Creation of Pd/Al2O3 Catalyst by a Spray Process for Fixed Bed Reactors and Its Effective Removal of Aqueous Bromate

Palladium nanoparticles were grown on sub-millimeter activated Al2O3 particle support by spraying H2PdCl4 solution evenly onto the support, followed with a thermal reduction under H2 atmosphere. Compared with its counterpart created by the conventional impregnation method, the Pd/Al2O3 catalyst created by the spray process could enrich the existence of active Pd nanoparticles on the surface of ...

New model for performance prediction in fixed-bed reactors based on the approach of the unused bed zone.

In the present study a practical model useful for designers dealing with pilot scale reactors for pollutant control has been developed. Investigations were undertaken for a single-component lead study on New Zealand clinoptilolite at the temperature of 25+/-1 degrees C. Fifteen runs under different operating conditions such as particle characteristics (expressed as d*(p)/D), column geometry (as...