Performance of finned heat pipe assisted parabolic trough solar collector system under the climatic condition of North East India
نویسندگان
چکیده
The intermittent nature of solar radiation drives the researchers to store energy using latent heat storage (LHS). In this work, an experimental investigation is carried out study performance a pipe assisted parabolic trough collector (PTC) along with paraffin wax based phase change material (PCM). experiment ha sbeen performed under climatic condition North-East India. Further, comparative assessment done between system and without circular fins attached in evaporator section pipe. transfer characteristics during charging/discharging process, temperature distribution, stored LHS are evaluated. maximum average temperatures for PCM estimated be 63 °C 60 fins, respectively. capacity around 330 kJ. charging efficiency fin configuration 44.7% which higher as compared configuration. discharging 32.7%, than presence found reduce pay back period thermal device.
منابع مشابه
Numerical analysis of performance of solar parabolic trough collector with Cu-Water nanofluid
In the present work the effect of Cu-Water nanofluid, as heat transfer fluid, on the performance of a parabolic solar collector was studied numerically. The temperature field, thermal efficiency, mean-outlet temperatures have been evaluated and compared for the conventional parabolic collectors and nanofluid based collectors. Further, the effect of various parameters such as fluid velocity, vol...
متن کاملInterconnected Heat Pipe Solar Collector
This paper deals with the performance of a heat pipe solar collector. The solar collector consisted of an interconnected heat pipe so as to reduce the production cost by using an interconnected heat pipe because all the heat pipes can be evacuated, sealed and tested at once. Performance of a prototype of the heat pipe solar collector was experimentally examined, and the results were compared wi...
متن کاملNumerical analysis of performance of solar parabolic trough collector with Cu-Water nanofluid
In the present work the effect of Cu-Water nanofluid, as heat transfer fluid, on the performance of a parabolic solar collector was studied numerically. The temperature field, thermal efficiency, mean-outlet temperatures have been evaluated and compared for the conventional parabolic collectors and nanofluid based collectors. Further, the effect of various parameters such as fluid velocity, vol...
متن کاملSimulation of the Temperature and Heat Gain by Solar Parabolic Trough Collector in Algeria
The objectif of the present work is to determinate the potential of the solar parabolic trough collector (PTC) for use in the design of a solar thermal power plant in Algeria. The study is based on a mathematical modeling of the PTC. Heat balance has been established respectively on the heat transfer fluid (HTF), the absorber tube and the glass envelop using the principle of energy conservation...
متن کاملManufacturing a trough parabolic solar collector and predicting its theoretical performance
The aim of this research was manufacturing a parabolic trough solar collector in which reflecting surface is made of mirror steel rather than usual mirror and also predicting its theoretical performance.by adjusting planar ⩝ -shaped structures parallel to each other and welding them together, the main supporting structure was assembled and a parabolic-shape Teflon arc was installed in the apert...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sustainable Energy Technologies and Assessments
سال: 2021
ISSN: ['2213-1388', '2213-1396']
DOI: https://doi.org/10.1016/j.seta.2021.101171