Performance Of Cables Subjected To Elevated Temperatures

Creep Behavior of High-Strength Concrete Subjected to Elevated Temperatures

Strain is generated in concrete subjected to elevated temperatures owing to the influence of factors such as thermal expansion and design load. Such strains resulting from elevated temperatures and load can significantly influence the stability of a structure during and after a fire. In addition, the lower the water-to-binder (W-B) ratio and the smaller the quantity of aggregates in high-streng...

A Study on Behaviour of Normal Strength Concrete and High Strength Concrete Subjected to Elevated Temperatures

Cement concrete is a complex mixture of different materials. Behaviour of concrete depends on its mix proportions and constituents when it is subjected to elevated temperatures. Principal effects due to elevated temperatures are loss in compressive strength, loss in weight or mass, change in colour and spall of concrete. The experimental results of normal concrete and high strength concrete sub...

Service Life of a Landfill Liner System Subjected to Elevated Temperatures

THE DEFORMATION BEHAVIOR OF AZ31 MAGNESIUM ALLOY AT ELEVATED TEMPERATURES

AZ31 magnesium alloy is considered as a promising alloy in various applications and industries. Furthermore, to design a proper hot working process (rolling, forging and extrusion), the assessment of hot working behaviour of the alloy is necessary. Accordingly, the hot deformation behaviour of AZ31 alloy was studied through hot compression testing method This was carried out in a wide range of ...

Letters to the Editor Discussion of “dynamic Stability of Cables Subjected to an Axial Periodic Load”

In the referenced paper [ 11, the author examines the stability of the planar, linear response of a suspended cable subjected to harmonic axial loading. The study is motivated by a desire to understand the dynamic stability of cables employed in structures such as cablestayed bridges or guy-towers. In these applications, the harmonic axial load derives from the dynamic reaction of the structure...