Performance of a dual-stage inerter-based vibration isolator
نویسندگان
چکیده
منابع مشابه
An electromagnetic inerter-based vibration suppression device
This paper describes how an inerter-based device for structural vibration suppression can be realized using an electromagnetic transducer such as a linear motor. When the motor shaft moves, a difference of voltage is generated across the transducer coil. The voltage difference is proportional to the relative velocity between its two terminals. The electromagnetic transducer will exert a force p...
متن کاملThe effect of beam inclination on the performance of a passive vibration isolator using buckled beams
Passive vibration isolators are desired to have both high static stiffness to support large static load and low local stiffness to reduce the displacement transmissibility at frequencies greater than resonance. Utilization of a vertical buckled beam as a spring component is one way to realize such a stiffness characteristic since it exhibits a smaller ratio of local stiffness to static stiffnes...
متن کاملVibration suppression of cables using tuned inerter dampers
This paper considers the use of a tuned inerter damper (TID) system for suppressing unwanted cable vibrations. The TID consists of an inerter, a device that exerts a force proportional to relative acceleration, coupled with a parallel spring and damper. It may be thought of as similar to a tuned-mass-damper, but requiring two terminals. As a two terminal device, the performance of the TID is co...
متن کاملOn the Performance of a Nonlinear Vibration Isolator Consisting of Axially Loaded Curved Beams
A desirable characteristic for nonlinear vibration isolators is a high static stiffness and a low dynamic stiffness. A curved beam is a possible candidate for this role provided that the amplitude of vibration about the static equilibrium position is sufficiently small. However, for large amplitude oscillations, the nonlinear dynamics may have a detrimental effect. This paper considers the forc...
متن کاملExperimental study on a nonlinear vibration isolator based on a post-buckled inverted L-shaped beam
In this paper, the characteristics and the effectiveness of a nonlinear passive vibration isolator based on a post-buckled beam is investigated experimentally. The intended application is specifically isolation in the vertical direction where the isolator is required to be sufficiently stiff statically to bear the weight of the isolated mass. The isolator consists of two beams joined to form an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.09.097