PERFORMANCE EVALUATION OF GLULAM MOMENT RESISTING JOINT SUBJECTED TO REPEATED CYCLIC LOADING
نویسندگان
چکیده
Fatigue behavior of glulam moment resisting joint subjected to repeated cyclic loading has not been well clarified. In addition, the accuracy conventional design formulae for rotational stiffness and yield/ultimate should be discussed especially related method obtain material properties. this research, tests were conducted drift pined joints with insert-steel gusset plate tensile-bolted joint. Deterioration strength energy dissipation is focused on. The dependency performance on properties also investigated through sensitivity analysis.
منابع مشابه
Moment-resisting connections in glulam beams
This paper describes an experimental investigation into the use of steel bars bonded into glulam timber beams with epoxy resins in order to provide moment-resisting joints between glulam beams and steel supports. The objective of this research was to provide information about the bending and shear strength of such connections. Past research has investigated the use of steel rods epoxy bonded in...
متن کاملassessment of the park- ang damage index for performance levels of rc moment resisting frames
چکیده هدف اصلی از طراحی لرزه ای تامین ایمنی جانی در هنگام وقوع زلزله و تعمیر پذیر بودن سازه خسارت دیده، پس از وقوع زلزله است. تجربه زلزله های اخیر نشان داده است که ساختمان های طراحی شده با آیین نامه های مبتنی بر نیرو از نظر محدود نمودن خسارت وارده بر سازه دقت لازم را ندارند. این امر سبب پیدایش نسل جدید آیین نامه های مبتنی بر عملکرد شده است. در این آیین نامه ها بر اساس تغییرشکل های غیرارتجاعی ...
15 صفحه اولConcrete Filled Tubular Bracing Subjected to Cyclic Loading
The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...
متن کاملTests to Determine the Joint Stiffness and Resisting Moment Capacity of Joints in Timber-Framed Houses
Wind and earthquake disasters in the world often cause billions of dollars of damage to buildings, most of which is to non-engineered buildings-especially homes. Wood-frame homes use connectors which exhibit partial rotational rigidity at the member ends, making analytical solutions difficult. This is due to the lack of information about the complex behavior of the connections used in this type...
متن کاملPerformance Evaluation of Curved-TADAS Damper on Seismic Response of Moment Resisting Steel Frame
In this study, the performance of triangular added damping and stiffness (TADAS) dampers combined with curved dampers (Curved-TADAS damper) is evaluated in moment resisting steel frame (MRSF). These dampers are passive and install in the beam-column connection region. Variable parameters of this study involve the width of curved damper (50, 75 and 100 mm), the thickness of TADAS damper (5 and 1...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Aij Journal of Technology and Design
سال: 2022
ISSN: ['1341-9463', '1881-8188']
DOI: https://doi.org/10.3130/aijt.28.167