Performance evaluation of a novel synchronously interdigitated/winded lithium-ion battery configuration enabled by 3D printing through numerical simulations

Numerical investigation of the parameters of a prismatic lithium ion battery under load for electrical vehicle

Electric vehicles and hybrid electric vehicles are a suitable alternative for vehicles with hydrocarbons fuels to reduce pollution and fossil resources. The batteries operate as the driving force for these vehicles. One of the most critical parameters of the battery is computing the state of charge (SOC). The best range for SOC of lithium-ion battery is between 20% and 90%, and charging and dis...

3D interconnected SnO2-coated Cu foam as a high-performance anode for lithium-ion battery applications

Performance Results for a Universal Lithium Ion Battery Management System

The advantages of lithium-based batteries over lead acid batteries have created great interest in developing safe and cost effective drop-in replacements. To achieve the required cost effectiveness and safety of the battery, Battery Management Systems (BMS) are critical to avoid over-charging, over-discharging, and continuously and accurately determining the State of Charge (SOC), State of Heal...

Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery

Lithium-iron-orthosilicate is one of the most promising cathode materials for Li-ion batteries due to its safety, environmental brightness and potentially low cost. In order to produce a low cost cathode material, Li2FeSiO4/C samples are synthesized via sol-gel (SG; one sample) and solid state (SS; two samples with different carbon content), starting from Fe (III) in the raw materials (lo...

Preparation of 3D nanoporous copper-supported cuprous oxide for high-performance lithium ion battery anodes.

Three-dimensional (3D) nanoporous architectures can provide efficient and rapid pathways for Li-ion and electron transport as well as short solid-state diffusion lengths in lithium ion batteries (LIBs). In this work, 3D nanoporous copper-supported cuprous oxide was successfully fabricated by low-cost selective etching of an electron-beam melted Cu(50)Al(50) alloy and subsequent in situ thermal ...