Performance enhancement of CdS nanorod arrays/P3HT hybrid solar cells via N719 dye interface modification
نویسندگان
چکیده
منابع مشابه
Energy barrier at the N719-dye/CsSnI3 interface for photogenerated holes in dye-sensitized solar cells
This report is to address the question if black γ-polymorph of cesium tin tri-iodide (B-γ-CsSnI3) can be used as a solid-state hole-transport material in the conventional DSSCs with the N719 dye to replace the liquid electrolyte as reported by I. Chung et al. on Nature 485, 486, (2012). Here we demonstrate rigorously that B-γ-CsSnI3 is not energetically possible to collect photogenerated holes ...
متن کاملHybrid nanorod-polymer solar cells.
We demonstrate that semiconductor nanorods can be used to fabricate readily processed and efficient hybrid solar cells together with polymers. By controlling nanorod length, we can change the distance on which electrons are transported directly through the thin film device. Tuning the band gap by altering the nanorod radius enabled us to optimize the overlap between the absorption spectrum of t...
متن کاملThe Construction and Comparison of Dye-Sensitized Solar Cells with Blackberry and N719 Dyes
In a dye-sensitized solar cell (DSSC), the amount of light absorption dependson the design of the pigments, which determines the strength of light absorption and theoptical range of the cell. In this paper, we have constructed and studied two fairly similarpattern of DSSCs in structure. The thickness of TiO2 used for both cells is taken to be 2μm. We have used an industrial N719 dye for one of ...
متن کاملCore-Shell CdS-Cu₂S Nanorod Array Solar Cells.
As an earth-abundant p-type semiconductor, copper sulfide (Cu2S) is an attractive material for application in photovoltaic devices. However, it suffers from a minority carrier diffusion length that is less than the length required for complete light absorption. Core-shell nanowires and nanorods have the potential to alleviate this difficulty because they decouple the length scales of light abso...
متن کاملMultifunctional Interface Modification of Energy Relay Dye in Quasi-solid Dye-sensitized Solar Cells
In this paper, 4-(dicyanomethylene)-2-t-butyl-6(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) has been used in interface modification of dye-sensitized solar cells (DSCs) with combined effects of retarding charge recombination and Förster resonant energy transfer (FRET). DCJTB interface modification significantly improved photovoltaic performance of DSCs. I-V curves shows the conversion...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Polymer Science
سال: 2013
ISSN: 0256-7679,1439-6203
DOI: 10.1007/s10118-013-1274-z