Performance Comparison of Organic Rankine Cycle and Vapour Compression Cycle Hybrid Cooling-Heating System using Subcritical or Supercritical Working Fluid
نویسندگان
چکیده
منابع مشابه
Selection of the optimum prime mover and the working fluid in a regenerative organic rankine cycle
A regenerative organic Rankine cycle (RORC) is modeled and optimized for the use of waste heat recovery from a prime mover (PM). Three PMs including, a diesel engine, a gas engine, and a microturbine are selected in this study. Four refrigerants including isobutane, R123, R134a, and R245fa are selected. The nominal capacity of the PM, PM operating partial load, turbine inlet pressure, condenser...
متن کاملEffect of Working-fluid Mixtures on Organic Rankine Cycle System Performance: Heat Transfer and Cost Analysis
A thermodynamic limitation of single-component working fluids in organic Rankine cycles (ORCs) is the large exergy destruction (and, consequently, useful power loss) associated with evaporation and condensation. Due to their non-isothermal phasechange behaviour, non-azeotropic working-fluid mixtures have shown reduced exergy losses, leading to improved cycle efficiencies and power outputs. Thes...
متن کاملCompare three different algorithms (MOPSO, SPEA2, NSGA-II) for Multi Objective Optimization of a novel Combined Cooling, Heating, and Power (CCHP) system based on organic Rankine cycle
Recently Debates about Energy and the issue of global warming have led to the use of new energy. One of the best options for this purpose is the use of a new hybrid system of power, heating and refrigeration, with its thermal source of solar and geothermal energy. In the present study, used a combined cooling, heating and power system based on the organic Rankine cycle and the Ejector Refrigera...
متن کاملOptimal Heat Source Temperature For Supercritical Organic Rankine Cycle
Organic Rankine Cycle (ORC) enables power generation from lowto medium temperature heat sources. In an ORC, the organic medium shows different performances for different heat source temperatures. For a range of heat source temperatures, one temperature can be always identified corresponding to the best thermal match between the heat transfer fluid and working fluid. This temperature is defined ...
متن کاملOptimization of Biomass-Fuelled Combined Cooling, Heating and Power (CCHP) Systems Integrated with Subcritical or Transcritical Organic Rankine Cycles (ORCs)
This work is focused on the thermodynamic optimization of Organic Rankine Cycles (ORCs), coupled with absorption or adsorption cooling units, for combined cooling heating and power (CCHP) generation from biomass combustion. Results were obtained by modelling with the main aim of providing optimization guidelines for the operating conditions of these types of systems, specifically the subcritica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201820202008