Performance Characteristics of Fiber Modified Asphalt Concrete Mixes
نویسندگان
چکیده
منابع مشابه
Characteristics of Ceramic Fiber Modified Asphalt Mortar
Ceramic fiber, with a major composition of Al₂O₃ and SiO₂, has advantages of stability at relatively high temperature, big specific surface area and resistance to external mechanical vibration. It has the potential contribution of improving the rutting resistance and temperature sensitivity of modified asphalt binder by proper modification design. In this research, ceramic fiber was introduced ...
متن کاملrutting performance of polypropylene modified asphalt concrete
rutting in asphalt concrete is a very common form of distress in asphalt concrete pavement which unfortunately has been incurable to date. one of the prime reasons of rutting is attributed to the behaviour of asphalt binder at elevated temperature. this study has investigated the performance of polypropylene fibres modified asphalt concrete mix against rutting. two types of asphalt concrete sam...
متن کاملInvestigating the Creep Properties of PET-Modified Asphalt Concrete
This study has investigated the creep properties of asphaltic concrete modified with different dosages of waste polyethylene terephthalate (PET) in two different ranges of size. Uniaxial dynamic creep test at 40°C was conducted on the cylindrical specimens of the mixtures. The load was applied in two different frequencies of 0.5 and 5Hz. Creep test results showed that the accumulated strain und...
متن کاملRutting Based Evaluation of Asphalt Mixes
Pavement rutting is one of the most common and destructive pavement distresses being observed in flexible pavements, which is primarily due to axle loads that exceed legal limit and high ambient temperatures, and also poor mix design is one of the cause of rutting. The drastic increase in traffic volume during last few decades has resulted in premature pavement failures of almost the whole road...
متن کاملSteel Slag Utilization in Asphalt Mixes
Steel slags are the major byproduct from the conversion of iron to steel in the basic oxygen (major type), electric arc and open hearth (minor type) steelmaking processes. Steel recovery from the slag results in a processed aggregate with both positive (wear resistant, skid resistant, rough textured, angular, well graded, stripping resistant) and negative (heavy, expansive) features. Considerab...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal on Pavement Engineering & Asphalt Technology
سال: 2014
ISSN: 2051-8234
DOI: 10.2478/ijpeat-2013-0007