Performance-Based Plastic Design Method for Steel Concentrically Braced Frames Using Target Drift and Yield Mechanism
نویسندگان
چکیده
منابع مشابه
Performance-based Plastic Design Method for Buckling- Restrained Braced Frames
This paper presents the key design points of buckling-restrained braced frames (BRBFs) by using the performance-based plastic design (PBPD) methodology. This method is based on energy-work balance concept and uses pre-selected target drift and yield mechanism as design criteria. Based on multi-mode pushover and time-history analyses, a simple equation is developed for computing yield drift rati...
متن کاملOPTIMUM PERFORMANCE-BASED DESIGN OF CONCENTRICALLY BRACED STEEL FRAMES SUBJECTED TO NEAR-FAULT GROUND MOTION EXCITATIONS
This paper presents a practical methodology for optimization of concentrically braced steel frames subjected to forward directivity near-fault ground motions, based on the concept of uniform deformation theory. This is performed by gradually shifting inefficient material from strong parts of the structure to the weak areas until a state of uniform deformation is achieved. In this regard, to ove...
متن کاملConcentrically Braced Frames: European vs. North American Seismic Design Provisions
A critical review of seismic design provisions for concentrically braced frames (CBFs) in both European and North American (i.e. US and Canadian) codes is presented in this paper. Indeed, even though those codes are based on capacity design philosophy, different requirements and different approaches are used to guarantee the hierarchy of resistances between dissipative and non-dissipative eleme...
متن کاملComparative Review of the Performance Based Design of Building Structures Using Static Non-Linear Analysis, Part A: Steel Braced Frames
The objective of this review to be submitted in two independent parts, for steel frames and for RC frames, is to compare their structural performance with respect to the proposed N2-method, and so also of the consequent convenience of using pushover methodology for the seismic analysis of these structures. A preliminary investigation is presented on a pushover analysis used for the seismic perf...
متن کاملEvaluating Response Modification Factors of Concentrically Braced and Special Moment Steel Frames in Duplex Buildings
Response modification factor (R-factor) is one of the seismic design parameters to consider nonlinear performance of building structures during strong earthquake. Relying on this, many seismic design codes led to reduce earthquake loads imposed to the structure. The present paper tries to evaluate the R-factors of conventional concentric braced frames (CBFs) and special moment frames (MRFs) in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Periodica Polytechnica Civil Engineering
سال: 2016
ISSN: 0553-6626,1587-3773
DOI: 10.3311/ppci.7383