Performance assessment of fired bricks incorporating pomegranate peels waste
نویسندگان
چکیده
Abstract This research investigated the reuse potential of pomegranate peels waste (PPW) in production fired clay bricks with improved thermo-physical and mechanical properties. PPW was used as a substitute for natural different replacement ratios ranging from 0 to 12.5% stride 2.5 wt%. The impact adding on compressive strength, total porosity, water absorption, bulk density, thermal conductivity microstructure characteristics has been assessed at 900, 1000 1100 °C. With increase ratio, strength decreased. obtained results confirm possibility using sustainable pore forming agent brick industry. incorporation 12.5 wt% showed lowest density (1230 kg/m 3 ), (0.2 W/mK), (5.5 MPa), highest absorption (38%), porosity (48%) satisfies minimum acceptable requirements bricks. contribution newly developed energy consumption performance building model evaluated by DesignBuilder simulation software. A considerable reduction annual about 23.3% attained compared traditional
منابع مشابه
Extract of Phenolics From Pomegranate Peels
The effects of different solvents, temperature conditions, solvent-solid ratios and particle sizes on solid-solvent extraction of the total phenolics, proanthocyanidins and flavonoids herein also referred to as antioxidant from pomegranate marc peel (PMP) was studied. Water, methanol, ethanol, acetone, and ethyl acetate extraction efficiencies at extraction times of 0.17 to 10 min, extraction t...
متن کاملDensity, Strength, Thermal Conductivity and Leachate Characteristics of Light-Weight Fired Clay Bricks Incorporating Cigarette Butts
Several trillion cigarettes produced worldwide annually lead to many thousands of kilograms of toxic waste. Cigarette butts (CBs) accumulate in the environment due to the poor biodegradability of the cellulose acetate filters. This paper presents some of the results from a continuing study on recycling CBs into fired clay bricks. Physico-mechanical properties of fired clay bricks manufactured w...
متن کاملPaper mill sludge (PMS) and degraded municipal solid waste (DMSW) blended fired bricks–a review
Attempts should be made to recycle, re–use and utilize waste. Paper manufacturing is a complex industry involving multiple processes where different products are produced and large quantities of waste of primary, biological or de–inking origin are generated, waste water treatment sludge, primary sludge, and secondary sludge among them.1,2 The primary sludge is generated in the largest quantitie...
متن کاملassessment of the park- ang damage index for performance levels of rc moment resisting frames
چکیده هدف اصلی از طراحی لرزه ای تامین ایمنی جانی در هنگام وقوع زلزله و تعمیر پذیر بودن سازه خسارت دیده، پس از وقوع زلزله است. تجربه زلزله های اخیر نشان داده است که ساختمان های طراحی شده با آیین نامه های مبتنی بر نیرو از نظر محدود نمودن خسارت وارده بر سازه دقت لازم را ندارند. این امر سبب پیدایش نسل جدید آیین نامه های مبتنی بر عملکرد شده است. در این آیین نامه ها بر اساس تغییرشکل های غیرارتجاعی ...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Innovative Infrastructure Solutions
سال: 2022
ISSN: ['2364-4184', '2364-4176']
DOI: https://doi.org/10.1007/s41062-022-00993-8