Performance and economic analysis of a reversed circular flow jet impingement bifacial PVT solar collector
نویسندگان
چکیده
As the world shifts towards a more sustainable future, solar energy has emerged as preeminent and economically feasible alternative to traditional sources, gaining widespread adoption. This study presents reversed circular flow jet impingement (RCFJI) which aims improve performance of bifacial PVT collector. An indoor experiment using simulator assess energy, exergy, economic efficiency RCFJI The was carried out irradiance ranging from 500-900W/m2 mass rate between 0.01-0.14 kg/s. Energy performance-wise, highest photovoltaic achieved 11.38% at 500 W/m2, while thermal 61.4% under 900 both obtained 0.14 kg/s rate. Regarding exergy performance, 47.27 W W/m2 kg/s, 9.67 0.01 Overall, higher is desirable for performance. Meanwhile, point view, lower preferable. Based on findings, optimal 0.06
منابع مشابه
Outdoor Performance Analysis of a Photovoltaic Thermal (PVT) Collector with Jet Impingement and Compound Parabolic Concentrator (CPC)
This paper discusses the effect of jet impingement of water on a photovoltaic thermal (PVT) collector and compound parabolic concentrators (CPC) on electrical efficiency, thermal efficiency and power production of a PVT system. A prototype of a PVT solar water collector installed with a jet impingement and CPC has been designed, fabricated and experimentally investigated. The efficiency of the ...
متن کاملThermal Performance of Jet Impingement with Spent Flow Management
The present study proposes novel micro-jet impingement heat sink with effusion holes for flow extraction. The design consists of impingement nozzles surrounded by multiple effusion holes to take away the spent fluid. A three-dimensional numerical model is used for steady, incompressible, laminar flow and conjugate heat transfer for the performance analysis of the proposed design. The computatio...
متن کاملAn experimental investigation of performance of a 3-D solar conical collector at different flow rates
The shape of a solar collector is an important factor in solar-to-thermal energy conversion. Conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. Flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. The present study is an experimentally investigated of the performance of the solar coni...
متن کاملEvaluation of a PVT Air Collector
Hybrid Photovoltaic Thermal (PVT) collectors are an emerging technology that combines PV and solar thermal systems in a single solar collector producing heat and electricity simultaneously. The focus of this thesis work is to evaluate the performance of unglazed open loop PVT air system integrated on a garage roof in Borlänge. As it is thought to have a significant potential for preheating vent...
متن کاملan experimental investigation of performance of a 3-d solar conical collector at different flow rates
the shape of a solar collector is an important factor in solar-to-thermal energy conversion. conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. the present study is an experimentally investigated of the performance of the solar coni...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Renewable Energy Development
سال: 2023
ISSN: ['2252-4940']
DOI: https://doi.org/10.14710/ijred.2023.54348