Performance Analysis of Brushless Wound Rotor Vernier Machine by Utilizing Third Harmonic Field Excitation
نویسندگان
چکیده
In this paper, a self-excited topology by utilizing third harmonic field excitation is proposed for realizing the brushless operation of Wound Rotor Vernier Machine (WRVM). The consists two windings housed inside stator periphery connected in series with three-phase diode rectifier. on are 12-pole and 4-pole armature winding. winding linked to open-end star help When current supplied inverter, 4-pole, Magneto Motive Force (MMF) developed machine air gap. fundamental MMF component develops main field. tends induce which rotor periphery. induced then rectified means an H-bridge rectifier excite winding, realizes WRVM. Two-dimensional Finite Element Analysis (2D-FEA) carried out JMAG designer software validate BL-WRVM. Furthermore, analyzed comparative analysis sub-harmonic model after verification FEA results. shows that results improved average torque when compared subharmonic wound-rotor vernier machine.
منابع مشابه
Brushless Wound-Rotor [Synchronous] Doubly-Fed Electric Machine By Real-time Control
Experts theorized that a Brushless Wound-rotor [Synchronous] Doubly-fed Electric Machine System (BWRSDF), which can symmetrically motor or generate with variable speed, provides higher efficiency, higher power density, higher torque density, and lower cost than any other electric machine system, including the permanent magnet electric machine system, but only with the discovery of a practical b...
متن کاملPerformance Analysis and Simulation of a Novel Brushless Double Rotor Machine for Power-Split HEV Applications
A new type of brushless double rotor machine (BDRM) is proposed in this paper. The BDRM is an important component in compound-structure permanent-magnet synchronous machine (CS-PMSM) systems, which are promising for power-split hybrid electric vehicle (HEV) applications. The BDRM can realize the speed adjustment between claw-pole rotor and permanent-magnet rotor without brushes and slip rings. ...
متن کاملComparison Study of Rotor Structures of Doubly Excited Brushless Reluctance Machine by Finite Element Analysis
Doubly Excited Brushless Reluctance Machine (DEBRM) has gained much attention recently in the area of variable-speed constant-frequency generating systems and adjustable speed drives. Two types of reluctance rotor structure, axially laminated and simple salient rotors, are suggested in the DEBRM development. Due to the unconventional pole number combination of the stator and rotor, performance ...
متن کاملPerformance Analysis of Wound Rotor Induction Motor by Dsp Based Rotor Dynamic Capacitor Control
The paper presents a novel secondary reactance control technique in the rotor circuit of a three phase wound rotor induction motor (WRIM). The problem associated with the conventional rotor capacitive reactance control is the demand of exceptionally large capacitance requirement for enhancing the performance of the motor in wide operating range. In the proposed technique, a three phase bridge r...
متن کاملAnalytical Investigation of the Magnetic-Field Distribution in an Axial Magnetic-Field-Modulated Brushless Double-Rotor Machine
Abstract: The axial magnetic-field-modulated brushless double-rotor machine (MFM-BDRM) is a novel possible alternative power-split device for hybrid electric vehicles (HEVs). This paper proposes a two-dimensional (2-D) analytical method to predict the performance of the axial MFM-BDRM to reduce computing time. The computation is based on the solution of Laplace’s or Poisson’s equation with boun...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2023
ISSN: ['2169-3536']
DOI: https://doi.org/10.1109/access.2023.3290302