Performa Redundancy Link Hot Standby Router Protocol IPv6 With Routing EIGRP for IPv6

Cisco Hot Standby Router Protocol (HSRP)

Status of this Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. This document reflects an existing deployed protocol. The IETF does have a working group which is in the process of producing a standards track protocol to address the same issues. Abstract The memo specifies the Hot Standby...

IPv6 Router Alert Option

New protocols, such as RSVP, use control datagrams which, while addressed to a particular destination, contain information that needs to be examined, and in some case updated, by routers along the path between the source and destination. It is desirable to forward regular datagrams as rapidly as possible, while ensuring that the router processes these special control datagrams appropriately. Cu...

RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks

RPL: IPv6 Routing Protocol for Low Power and Lossy Networks

Today, Low Power and Lossy Networks (LLNs) represent one of the most interesting research areas. They include Wireless Personal Area Networks (WPANs), low-power Power Line Communication (PLC) networks and Wireless Sensor Networks (WSNs). Such networks are often optimized to save energy, support tra c patterns di↵erent from the standard unicast communication, run routing protocols over link laye...

Negotiation for IPv6 Datagram Compression Using IPv6 Control Protocol

Status of This Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Abstract The Point-to-Point Protocol (PPP...